Hello All, It looks like I have the same (?) issue with image noise as mentioned by Kaien - test image is available here: http://www.ndl.kiev.ua/downloads/image_noise.raw - the image is taken via http://<camera-ip>/raw.php interface with fully closed lens iris.
All parameters are at default values, so far the only changed camera setting is its IP address. The "status report" of the camera is available here: http://www.ndl.kiev.ua/downloads/elphel_status_report.txt - "FPGA Version" is 3534011 (which seems to be the latest one?), so I haven't tried to upgrade FPGA to CVS version. Is it possible that default sensor sensitivity/gains are too high for the purposes of "getting clean image"? If yes, what would be the best place to change these and what are the suggested values? Thanks! -- Good luck! Alexander _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
