I have not tried to compile the distribution before but am willing to
give it a try. Where in the code is the multicast address defined? I
have seen this address in the parameter list but changing it there does
not appear to do anything.
-scott
Stefan de Konink wrote:
Op 08-03-10 19:15, Scott Janz schreef:
unicast/udp without tcp acknowledgement is what we need. The stream
needs to be sent via UDP to a storage/wide-band router device.
This should be possible by substituting the multicast address by the
target unicast adres. Can you try to compile this in yourself?
Stefan
_______________________________________________
Support-list mailing list
[email protected]
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
--
---------------------
Dr. Scott J. Janz
NASA/GSFC code 613.3
Building 33 Room E310
Greenbelt, MD 20771
ph. 301-614-5987
fax 301-614-5903
_______________________________________________
Support-list mailing list
[email protected]
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
