Hi Andrey I have attached you the build.log file, also I have used the magic command ./init_env in order to set the variables, but I dont have kimage and I cant find it at Aptitude repositories.
BR Esteban 2010/7/20 Andrey Filippov <[email protected]> > Hi Esteban, > > yes, you are right - Knoppix-based live DVD is somewhat outdated by now. We > planned to make an (K)Ubuntu-based one, but never finished that. > > I can suggest you the following 2 options: > > 1) install some old network card in you computer and try Live DVD > 2) Install the complete SDK ( > http://wiki.elphel.com/index.php?title=Elphel_Software_Kit_for_Ubuntu ) - > that should work with Kubuntu 9.045, 9.10 and 10.04. Please tell what > exactly failed when you try to install the SDK (there should be "build.log" > file in the installation directory that you can compress and email us). Or > have you already done that? > > > > On Tue, Jul 20, 2010 at 12:04 PM, Esteban Correa-Agudelo < > [email protected]> wrote: > >> >> Hi, I have a 353 camera that I need to upgrade, unfortunately LiveDVD >> (1.5.0 version) does not work to me because I upgrade my pc and It does not >> detect the new ethernet hardware. also, unfortunately I couldnt update the >> camera firmware using the ./netboot command: >> ./netboot -d eth0 -ip 192.168.0.9 -nfs 192.168.0.15:/nfs -cmd update >> >> Because something is wrong with the script: >> >> *./netboot: líne 40: cmdline: command not found >> cat: kimage: file or directory does not exist >> ./netboot: líne 44: etraxfsboot: command not found * >> > > Have you tried a magic command > . ./init_env > (in the top installation directory) before running ./netboot? That would > fix 2 of the 3 errors above (if you already had built the Axis tools as a > part of the installation script), but you need to have kimage, of course. > > >> >> Finally I try to make a updated liveDVD (with knoppix 5.3 because I cant >> find the knoppix 5.2 ) without success too :(. >> when I am executing the livecd-make, its output is : >> ./livecd-make: 1: Syntax error: Bad fd number note: I am running ubuntu >> 9.10 >> >> That would be too difficult path, it is much easier to setup everything on > the current (K)Ubuntu. > > Andrey > > -- Esteban M. Correa Agudelo Laboratorio Sirius HPC Universidad Tecnológica de Pereira
Verifying [32;01mAxis Development Board R2_10 Arcive[37;01m (devboard-R2_10.tar.gz in /nfs/elphel353-2.10/distfiles) [32;01mOK[37;01m [0m [0m ---processing /nfs/elphel353-2.10/distfiles/devboard-R2_10.tar.gz ---creating link to downloaded (or to be downloaded) files ---copying Elphel files needed before ./configure Running Axis configure [0m «../elphel_preconfigure/configure-files/source-R1_12_0/functions» -> «./configure-files/source-R1_12_0/functions» * Unpacking "distfiles/tools-build-R2_19_3.tar.gz"... done * Unpacking "distfiles/configure-files-devboard-AC_common-tag--devboard-R2_10-1.tar.gz"... done * Unpacking "distfiles/configure-files-devboard-AC_general-tag--devboard-R2_10-1.tar.gz"... done * Unpacking "distfiles/configure-files-devboard-AC_hardware-tag--devboard-R2_10-1.tar.gz"... done * Unpacking "distfiles/configure-files-devboard-AC_libraries-tag--devboard-R2_10-1.tar.gz"... done * Unpacking "distfiles/configure-files-devboard-AC_network_application-tag--devboard-R2_10-1.tar.gz"... done * Unpacking "distfiles/configure-files-devboard-AC_network_protocol-tag--devboard-R2_10-1.tar.gz"... done * Unpacking "distfiles/configure-files-devboard-AC_web-tag--devboard-R2_10-1.tar.gz"... done * Unpacking "distfiles/configure-files-common-AC_common-tag--devboard-R2_10-1.tar.gz"... done * Select which product configuration to use. * 1. elphel353 - "Elphel (R) Model 353 Camera" * Specify product [1-1] (default: 1): * Selected product is "elphel353" To select another product run: "DEV_BOARD_PRODUCT=<product name> ./configure" * The SDK installation will soon start download and install the source packages required for the default configuration. If you would like to use a different configuration you can configure the SDK, hence avoid downloading and installing of unnecessary packages. * Would you like to configure the SDK now [y/n] (default: n)? * Unpacking "distfiles/configure-files-common-common-tag--devboard-R2_10-1.tar.gz"... done * Unpacking "distfiles/modules-rules.build_modules-R1_1_1.tar.gz"... done * Unpacking "distfiles/tools-iopasm-IR1_4-2.tar.gz"... done * Unpacking "distfiles/modules-Rules.iop-R1_1_0.tar.gz"... done * Using compiler "/usr/local/cris/bin/crisv32-axis-linux-gnu-gcc" (revision "R64"). * Unpacking "distfiles/packages-filesystem-R1_3_0.tar.gz"... done * Unpacking "distfiles/packages-base-files-R1_2_2.tar.gz"... done * Unpacking "distfiles/packages-devices-standard-R1_3_1.tar.gz"... done * Unpacking "distfiles/packages-devices-axis-2.4-R1_1_0.tar.gz"... done * Unpacking "distfiles/packages-romfs_meta-common-R1_2_1.tar.gz"... done * Unpacking "distfiles/os-linux-2.6-tag--devboard-R2_10-4.tar.gz"... done * Unpacking "distfiles/packages-os-linux-2.6-R1_4_2.tar.gz"... done * Unpacking "distfiles/os-nandboot-R2_0_4.tar.gz"... done * Unpacking "distfiles/libs-gcc-R1_2_0.tar.gz"... done * Unpacking "distfiles/libs-gcc-glibc-R1_2_1.tar.gz"... done * Unpacking "distfiles/libs-termcap-R1_0_7.tar.gz"... done * Unpacking "distfiles/libs-readline-IR5_1-2.tar.gz"... done * Unpacking "distfiles/libs-gsasl-IR0_0_13-2.tar.gz"... done * Unpacking "distfiles/libs-fwinfo-R1_2_0.tar.gz"... done * Unpacking "distfiles/libs-libfdipc-R1_0_7.tar.gz"... done * Unpacking "distfiles/packages-initscripts-common-R2_14_2.tar.gz"... done * Unpacking "distfiles/packages-initscripts-respawnd-R1_0_2.tar.gz"... done * Unpacking "distfiles/packages-initscripts-issue-R2_1_2.tar.gz"... done * Unpacking "distfiles/packages-initscripts-mountall-R1_0_3.tar.gz"... done * Unpacking "distfiles/packages-initscripts-var-R2_0_2.tar.gz"... done * Unpacking "distfiles/packages-initscripts-mac-R2_1_0.tar.gz"... done * Unpacking "distfiles/packages-initscripts-urandom-R1_0_1.tar.gz"... done * Unpacking "distfiles/packages-initscripts-hostname-R2_1_5.tar.gz"... done * Unpacking "distfiles/packages-initscripts-resolv-R1_2_3.tar.gz"... done * Unpacking "distfiles/packages-initscripts-net-R1_7_9.tar.gz"... done * Unpacking "distfiles/packages-initscripts-net.lo-R1_3_2.tar.gz"... done * Unpacking "distfiles/packages-initscripts-rc-net-R0_1_4.tar.gz"... done * Unpacking "distfiles/packages-initscripts-rc-udhcpc-R0_1_5.tar.gz"... done * Unpacking "distfiles/packages-initscripts-net.eth0-R1_6_0.tar.gz"... done * Unpacking "distfiles/apps-init-R1_3_6.tar.gz"... done * Unpacking "distfiles/apps-sys-utils-start-stop-daemon-IR1_9_18-1.tar.gz"... done * Unpacking "distfiles/apps-sys-utils-respawnd-R1_3_3.tar.gz"... done * Unpacking "distfiles/apps-ipsetd-R1_2_4.tar.gz"... done * Unpacking "distfiles/packages-initscripts-ipsetd-R2_5_1.tar.gz"... done * Unpacking "distfiles/apps-flash-R1_4_0.tar.gz"... done * Unpacking "distfiles/apps-vftpd-R1_2_5.tar.gz"... done * Unpacking "distfiles/packages-initscripts-vftpd-R1_3_1.tar.gz"... done * Unpacking "distfiles/packages-param-network-ftp-R1_0_1.tar.gz"... done * Unpacking "distfiles/apps-sys-utils-sysklogd-R1_0_4.tar.gz"... done * Unpacking "distfiles/packages-initscripts-sysklogd-R1_2_3.tar.gz"... done * Unpacking "distfiles/apps-ethtool-R1_0_3.tar.gz"... done * Unpacking "distfiles/apps-eth_ctrl-R1_0_3.tar.gz"... done * Unpacking "distfiles/apps-bootblocktool-R1_3_0.tar.gz"... done * Unpacking "distfiles/apps-utils-flashutils-R1_1_4.tar.gz"... done * Unpacking "distfiles/apps-utils-mtdutils-IR1_0_1-3.tar.gz"... done * Unpacking "distfiles/apps-utils-readbits-R1_3_1.tar.gz"... done * Unpacking "distfiles/apps-utils-setbits-R1_1_1.tar.gz"... done * Unpacking "distfiles/apps-shells-dash-IR0_5_3-7.tar.gz"... done * Unpacking "distfiles/packages-shell-ash-profile-common-R1_0_3.tar.gz"... done * Unpacking "distfiles/packages-shell-ash-profile-prompt-R1_0_2.tar.gz"... done * Unpacking "distfiles/packages-shell-ash-profile-path-R0_0_2.tar.gz"... done * Unpacking "distfiles/packages-scripts-vmstatus-R1_0_0.tar.gz"... done * Unpacking "distfiles/packages-param-syslog-development-R1_1_1.tar.gz"... done * Unpacking "distfiles/packages-apps-vftpd-flash_only-R1_1_1.tar.gz"... done * Unpacking "distfiles/packages-scripts-start_ok-R1_0_1.tar.gz"... done * Unpacking "distfiles/apps-busybox-IR1_1_3-5.tar.gz"... done * Unpacking "distfiles/apps-iproute2-IR2_6_15-060110-4.tar.gz"... done * Unpacking "distfiles/libs-libpcap-IR0_9_4-4.tar.gz"... done * Unpacking "distfiles/apps-tcpdump-IR3_9_4-3.tar.gz"... done * Unpacking "distfiles/apps-sftpclient-R1_3_4.tar.gz"... done * Unpacking "distfiles/packages-dhcp-udhcpc-initscripts-R1_3_2.tar.gz"... done * Unpacking "distfiles/packages-ipsetd-devboard-R1_0_3.tar.gz"... done * Unpacking "distfiles/apps-utelnetd-R1_1_0.tar.gz"... done * Unpacking "distfiles/packages-initscripts-utelnetd-R1_1_2.tar.gz"... done * Unpacking "distfiles/apps-dev-utils-gdbserver-IR6_3-20050524-2.tar.gz"... done * Unpacking "distfiles/apps-crypto-dropbear-IR0_46-2.tar.gz"... done * Unpacking "distfiles/packages-initscripts-dropbear-R1_0_1.tar.gz"... done * Unpacking "distfiles/apps-crypto-openssl-IR0_9_7f-3.tar.gz"... done * Unpacking "distfiles/packages-web-pics-axislogo-R1_0_4.tar.gz"... done * Unpacking "distfiles/packages-web-directories-R1_0_5.tar.gz"... done * Unpacking "distfiles/packages-web-apps-cgiprg-releaseinfo-R1_0_6.tar.gz"... done * Unpacking "distfiles/apps-editors-editcgi-R1_0_11.tar.gz"... done * Unpacking "distfiles/packages-web-apps-editors-editcgi-R1_0_4.tar.gz"... done * Unpacking "distfiles/packages-web-devboard-index-devboard-R1_0_4.tar.gz"... done * Unpacking "distfiles/packages-web-devboard-compref-axis_88-R1_0_0.tar.gz"... done * Unpacking "distfiles/packages-devices-ide-R1_0_4.tar.gz"... done * Unpacking "distfiles/packages-devices-scsi-R1_0_1.tar.gz"... done * Unpacking "distfiles/modules-usb-iop-firmware-binary-R1_0_1.tar.gz"... done * Unpacking "distfiles/modules-usb-iop-include-R1_00.tar.gz"... done * Unpacking "distfiles/modules-usb-iop-common-R1_01.tar.gz"... done * Unpacking "distfiles/modules-usb-iop-cris-2.6-R1_05.tar.gz"... done * Unpacking "distfiles/packages-modules-usb-iop-IR1_0_2.tar.gz"... done * Unpacking "distfiles/apps-dev-utils-strace-IR4_5_8-3.tar.gz"... done * Using previously fetched packages... done * Unpacking "distfiles/alsa-lib-1.0.19.tar.bz2"... done * Unpacking "distfiles/alsa-driver-1.0.19.tar.bz2"... done * Unpacking "distfiles/alsa-utils-1.0.19.tar.bz2"... done * Unpacking "distfiles/glib-2.12.9.tar.gz"... done * Unpacking "distfiles/pcre-7.0.tar.gz"... done * Unpacking "distfiles/fcgi-2.4.0.tar.gz"... done * Unpacking "distfiles/lighttpd-1.4.13.tar.gz"... done * Unpacking "distfiles/php-5.2.9.tar.bz2"... done * Unpacking "distfiles/zlib-1.2.3.tar.gz"... done * Unpacking "distfiles/libpcap-0.8.3.tar.gz"... done * Unpacking "distfiles/mtd-utils-1.0.0.tar.gz"... done * Unpacking "distfiles/libogg-1.1.3.tar.gz"... done * Unpacking "distfiles/sqlite-amalgamation-3.6.11.tar.gz"... done * Unpacking "distfiles/sqlite3-0.5.tgz"... done * Unpacking "distfiles/libxml2-2.6.31.tar.gz"... done * Unpacking "distfiles/garminusb2nmea-0.12a.tar.gz"... done * Unpacking "distfiles/busybox-1.13.3.tar.bz2"... done * Unpacking "distfiles/net-snmp-5.4.2.tar.gz"... done * Unpacking "distfiles/libsamplerate-0.1.7.tar.gz"... done * Unpacking "distfiles/jack-audio-connection-kit-0.116.2.tar.gz"... done * Unpacking "distfiles/libsndfile-1.0.20.tar.gz"... done * Unpacking "distfiles/timemachine-0.3.3.tar.gz"... done * Generating "Makefile"... done * Configuration of the SDK is done! To build firmware images for "elphel353" run "make" [40;01m[37;01m Copying the rest of Elphel files (new and/or modified) on top of original from the Axis Development Board Copying top level files for future distribution creation cp: no se puede efectuar `stat' sobre «../install_elphel»: No existe el fichero ó directorio «../LICENSE» -> «./LICENSE» «../README» -> «./README»
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
