Hi, I'm having some issues with the firmware upgrade web interface of my camera, which currently has firmware 8.0.8.48
when I go to the firmware upgrade web interface, and enter the NFS share IP & directory there (in my case, 192.168.3.20:/tmp/image/image353-8.0.9/ ), and press the 'Check NFS' button, I get: NFS connection validated Files: kimage not found! list not found! MD5SUM not found! nfs_flashitall not found! nfs_update not found! part0.img not found! part1.img not found! part2.img not found! part3.img not found! partitions. not found! this is despite the fact that the files are there. checking manually from the camera: # mount rootfs on / type rootfs (rw) /dev/root on / type jffs2 (ro) /dev/part/rwfsblock on /mnt/flash type jffs2 (rw) proc on /proc type proc (rw) tmpfs on /var type tmpfs (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw) none on /proc/bus/usb type usbfs (rw) 192.168.3.20:/tmp/image/image353-8.0.9/ on /var/tmp/nfs_test type nfs (rw,vers=3,rsize=1048576,wsize=1048576,hard,nolock,proto=tcp,timeo=70,retrans=3,sec=sys,addr=192.168.3.20) # ls /var/tmp/nfs_test/ | more MD5SUM kimage list nfs_flashitall nfs_update part0.img part1.img part2.img part3.img partitions.conf what is the easy way of flashing the camera, without the HTML UI magic, but from command line? Akos _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
