Thanks Oleg, If you can provide us with an ETA on the correction it would be much appreciated. In addition too the specific fix, we need the latest firmware to fix a bug that Olga advised us on (below) in the previous firmware. (The bug is causing haywire with our motion detection algorithms as edge detection picks up on the distortion, not real object edges). I have held up upgrading firmware until these the recent camera¹s arrived since I wanted to maintain working configurations.
Michael, if you could please test this out so we can at least get to a working baseline configuration in place I would appreciate it. Thanks, Philip On the 16/08 Olga wrote: > I forgot to mention that we noticed the colored artifacts on the stereo images >- some red and green dots in some areas. It happened because of the not > perfect phase adjustment (because of the long cable in stereo camera). We > have updated the code that eliminates this problem. So the stereo image quality will be better. On 7/12/10 1:39 PM, "Oleg K Dzhimiev" <[email protected]> wrote: > An update: > > With the current software: > 1) Reflashing is not needed - we need to correct another bug with resizing in > a single channel mode: > so far can be fixed with: fpcf -i2cw16 80a <image-width-in-hex> > 2) Resizing works correctly in the combined frames mode. > > Best regards, > Oleg >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
