Hi all, we are currently working on our project using the 10359-board. We wanted to test some stuff, but when the camera uses the bit-image for x359 that we created (from the most recent source code version), the camera only produces a white image with 1x1 pixel.
I got a working bit-image when using the FPGA-source version 8.0.7 (the one which is also the firmware version of our camera atm), opening it using the source import-assistant of Xilinx 11.1 and then converting it to a ISE 12.3-project. But what about the x359 version 8.0.9.1? I open it up in ISE 12.3 via the .xise-file but it doesn't build with this error(s): ERROR:ConstraintSystem:59 - Constraint <NET "i_sp1/clkout" TNM_NET = "TNM_SP1_GCLK_IDATA";> [x359.ucf(170)]: NET "i_sp1/clkout" not found. Please verify that: 1. The specified design element actually exists in the original design. 2. The specified object is spelled correctly in the constraint source file. ERROR:ConstraintSystem:59 - Constraint <NET "i_sp2/clkout" TNM_NET = "TNM_SP2_GCLK_IDATA";> [x359.ucf(177)]: NET "i_sp2/clkout" not found. Please verify that: 1. The specified design element actually exists in the original design. 2. The specified object is spelled correctly in the constraint source file. Sincerely, Jens _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
