David, Sebastien,
ccam.php may not be the optimal way to control these parameters - it is a large script made to replace functionality of the older ccam.cgi And in 8.x software you do not need to do anything more than write the new parameter to apply it. This script may be relatively slow, I would recommend making a small one that controls just the parameters you need - the snapfull.php ( http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/packages/web/353/php_top/snapfull.php?view=markup) can be an example of such script. It saves the current values of the parameters that are to be modified, modifies them,acquires 1 image and changes parameters back. It was designed to acquire full resolution snapshots with minimal interruption to the simultaneous streaming of lower resolution video. To experiment with the parameters (or just change them manually) I would recommend using parsedit.php. There are usage examples on the page http://192.168.0.9/parsedit.php (if the camera ip is in default state), alternatively you may get there from http://192.168.0.9/autocampars.php - select parameters group and press view/edit selected - it will generate parsedit.php with the list of parameters. On that generated page you may hover mouse pointer over the parameter - it will show short explanation of it. Andrey
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
