Andrey, I can't set the exposure time even near 67ms. We have difficult lighting conditions. For example, we have an indoor room with a bright window where the cam is moving. Setting the exposure time to 72ms will give me a blurred image of the window. Anything else may be sharp due to the fact that it is only lighted for 5ms. Is the only option to set the exposure time to 5ms and turn the leds on for 72ms?
Andreas Andrey Filippov schrieb: > Sebastian, > > Most consumer cameras with ERS have additional mechanical shutter - it > opens 1/15 sec (if they used the same senor) after the sensor starts > exposing the first line, readout starts after the shutter closes. When > using the bright LED it the LED on state is virtually the same as > mechanical shutter open > > Andrey > > ERS (Electronic Rolling Shutter) has been used in all consumer as well > as professional CMOS based camera systems to date. > >
<<attachment: office.vcf>>
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
