Hi, Before we start a project based on the Elphel camera, we need to have crucial information for basic application matching.
I understand that the mailing list is the best support option, so here are my questions: regarding model: NC353L-359-STEREO 1) Our application requires low latency (close to real time). considering the other aspects (of bit rate & 3D HDTV image quality), what latency can I achieve with this camera? is it possible to have it ~1 frame? 2) Since we use the camera for real time streaming purposes it is very important to limit the maximum bit rate or use it in constant bit rate mode. is this supported (maximum bit rate)? can we expect 3D HDTV quality in 8-12Mbits? 3) What is the typical/stand by/maximum power consumption of the module? can it use a single Li-Ion battery voltage supply (3.6v)? 4) does the encoding module support h264? If not, is Ogg Theora good enough (for the stated bit rate & latency requirements)? 5) What typical image quality can we expect from the sensor/lens combination? do you have sample footage for the NC353L-359-STEREO? does it have an image stabilizer HW/SW? I would be glad to clarify any issue regarding the questions in case some are not clear enough. Thanks in advance, Doron
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
