Dear Tom, The easiest way (well, for me) to be able to connect to the camera is to connect it directly (not forgetting the power supply) to your pc and set the pc's ip address to 192.168.0.15, for example. Then http://192.168.0.9.
But if you can set up your router so that the devices from subnets 192.168.0.xxx & 10.0.0.xxx could see each other - it's better to do it this way. Best regards, Oleg PS. Sorry, the first e-mail was from the wrong address and didn't get to the support-list.
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
