Tom, The only case when your laptop ( ubuntu 10.04?) can lose wired connection is when there's no link - the amber led should go off/on and that should cause the camera to reboot. And the camera won't reboot, right?
Please, try the following: 1) Check how the amber led behaves when the pc loses its ip address. 2a) Disable wi-fi - in case your OS can't handle 2 networks at the same time. or 2b) Make it so the pc won't lose its ip address when something is plugged/unplugged - it's not trivial (if not impossible) in (k)ubuntu's network manager =) or 2c) Change the camera's IP to 10.0.0.xxx (192.168.0.9 -> System Preferences) and plug it to your wi-fi router - that would be the most effective solution of the problem. Best regards, Oleg Dzhimiev On 10 June 2011 01:19, Tom Sparks <[email protected]> wrote: > --- On *Fri, 10/6/11, Andrey Filippov <[email protected]>*wrote: > > > From: Andrey Filippov <[email protected]> > Subject: Re: [Elphel-support] hard drive/Disk Recorder issues > To: "Tom Sparks" <[email protected]>, > [email protected] > Received: Friday, 10 June, 2011, 1:17 AM > > > > > On Thu, Jun 9, 2011 at 4:08 AM, Tom Sparks > <[email protected]<http://mc/[email protected]> > > wrote: > > I am have hard drive/disk Recorder issues > > the Disk recorder gui sometimes mounts the hard drive > but by the time I can do something (record/view/download videos) the > network disconnects > > > Tom, can you please be more specific - what does that mean "network > disconnects" ? Is it something related to the camera, computer or some > router/switch? > > the computer is connected directly to the camera > the computer report the network has been disconnected and then reconnected > > I try refreshing the page, and I get can not connect to 192.168.0.9 > > > Refreshing the control page while it is running might have some side > effects. > > > I forced to disable my ethernet connection and re-enabling it > I then refresh the page and the issue starts again :( > > > What do you mean by "disable my ethernet connection and re-enabling it" -is > it in the camera or on your computer? > > on the computer > > > What actions/command do you run? Can you provide additional information > about your network configuration? > > the computer has two networks > camera to computer (computer: 192.168.015 camera 192.168.0.9) > WIFI network (10.0.0.X) > > > Andrey > > > > > if a screencast can explain it better I can do one? > -- > tom_a_sparks "It's a nerdy thing I like to do" > Please use ISO approved file formats excluding Office Open XML - > http://www.gnu.org/philosophy/no-word-attachments.html > 3 x (x)Ubuntu 10.04, Amiga A1200 WB 3.1, UAE AF 2006 WB 3.X, Sam440 AOS 4.1 > > _______________________________________________ > Support-list mailing list > [email protected]<http://mc/[email protected]> > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
