HI Carlos Good to see you are starting your hands-on with the camera ;)
ElphelVision is an Apertus product not an official Elphel one (I know the name is especially confusing....we might have to rename it). So the correct place to report bugs is: http://bugs.apertus.org/thebuggenie/index.php The md5s are written by the Apertus in-camera scripts after recording finished (under normal conditions). If the datarate is too high the circbuffer will immediately overflow not writing anything to disk ( but the mov/jpeg header - which would explain the few bytes you reported). This can be the case if JPEG quality ratio is too high. Since the camera returns to its default state after it has been rebooted can you please test if everything works fine when you try recording with a freshly booted camera with these settings applied in camvc: 1920x1088 25fps RGB color mode 80% jpeg quality Why PHP and filezilla cannot see the files would need some further investigation.... Regards Sebastian On Mon, Jan 30, 2012 at 13:43, Carlos Padial <[email protected]> wrote: > Hi > > I am in the first days with the 353 and i have been recording some > videos the last two days > and the hdd has been working right, but with some issues when camogm > mount the devices. > > At first it doesnt recognice the device one each three times... then i > started using elphelvision, the first time i start elphelvision, it > doesn't recognice the hdd, > but then i restart elphelvision and everything works. I managed to > record some videos correctly. Also from camogm when it recognices the > hdd. > > After that i tried some strange combinations of fps and resolutions > (in elphelvision) and the mov files become blank... > it creates a lot of mov files without md5 file, and the same size. > also strange md5 files over md5 files... like > > 1327874552_117892.mov > 1327874552_117892.mov.md5 > 1327874552_117892.mov.md5.md5 > 1327874552_117892.mov.md5.md5.md5 > > now i cannot record with elphelvision, even sometimes it starts > recording from the very start of the application... > > camogm no more detects the hdd. but it lets me to create folders... > then it remains showing "nothing mounted" and nothing behind... > if i use the php file browser i cant see the folder just created... if > i use filezilla ftp i cant see it. > but if i use telnet the folder is there... > > It also happens with movies in camogmgui, i can record (the UI changes > to Record and so) > but mov files are created, always with 784 bytes and ogm's with > 145bytes, and no signal. > > when Streaming the camera works properly. > > I tried to format the hdd, following the wiki > http://wiki.elphel.com/index.php?title=HDD_Format > i dont know what to do in step 3. > > my cat /proc/partitions says: > > $ cat /proc/partitions > major minor #blocks name > > 3 0 117220824 hda > 3 1 117220820 hda1 > 31 0 131072 mtdblock0 > 31 1 256 mtdblock1 > 31 2 7936 mtdblock2 > 31 3 24576 mtdblock3 > 31 4 81920 mtdblock4 > 31 5 12288 mtdblock5 > > i followed the wiki without any special commands in step3 and it seems > to work , but im not sure. > how can i chek the disk? ¿why i cannot see some files in the php > browser or filezilla? > > the disk doesn seems to be damaged, as i can use it to copy files from > ftp, it seems to work right. > > but all videos are mov files 784 bytes and ogm's 145bytes, and black :( > > what do you think? > > thanks in advance. > carlos padial. > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
