Eric, You can use autocampars.php to save camera settings. If you open the default camera page - there will be "Parameter Editor" link. If you just need to save current settings, you may press one of the "Save" buttons, optionally write some comment and press "Update" to the right of it. Next time the camera will boot with these settings. If you want to change the parameter group used at boot time, you may select it and press "Update Default" button.
You may also use it to change many of the other camera settings - check some of the parameter groups and follow the link "View/Edit Current" - it will open parsedit.php with selected parameters, you may also open parsedit.php without parameters and it will show instructions/examples page. parsedit.php has "tooltips" for the parameters - when you hover the mouse over it, small description will pop-up. Andrey On Sun, Mar 4, 2012 at 8:28 AM, Eric Boudrand <[email protected]> wrote: > Hi, > > How can I save settings I made in camvc.html page ? I am selecting > 1920x1088 image size and unicast. Each time I am powering the camera > down and repowering it up I have to setup again these settings. I am > embedding the camera into a device and I would like to avoid > reconfiguration. > > When I try to store network settings, I am getting message "There was a > problem retrieving the XML data: Not Found" > > Thanks. > > Éric > > > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
