Hello, Diego, Thanks for the reply!
Oleg answered me, but I think the answer came just to may e-mail - this is the full conversation, I'll post it so it gets online (at the moment, I'm thinking about the compact flash cards, please see below): And thank you very much for the support! --- Flavio, >From the camera's homepage go to System Preferences -> Network. And change the ip address (to 192.168.1.9, for example) so it would be valid for in current subnetwork (if the default mask 255.255.255.0) which is 192.168.1.xxx in your case. How did you set up the wired interface address? dhcp or manual? Also how do you set the wireless address? --- Hi, Oleg, Thanks for the answer. I'll reboot and try the with the live USB. My network is dhcp, all the computers plugged to a router via cables or wireless. But I do have access to the router, in case it's needed. I'll be back soon. --- Oleg, thank you very much! That was it! It works fine now! This afternoon, I'll update this info at the wiki too, so that it can be easily accessed. Could I ask you one more question? I am with the 353 model. I'm thinking about opening the camera to try some Compact Flash cards I have here. These are the models I have: I have one of this: http://www.bhphotovideo.com/c/product/469825-REG/Kingston_CF1GBS_1GB_Elite_Pro_50X.html And two of these: http://www.bhphotovideo.com/c/search?Ntt=KICFU4GB&N=0&InitialSearch=yes >From what I have, there was an issue with DMA from the cards, but the thread seems to be old. What precautions should I take in opening the camera? Also, if the cards do not work, will the camera simply hang or is there any chance of damaging it? Thanks again for the help! best regards, flavio
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
