I have a outdoor application were we think we need a auto-iris lens with our Elphel camera. Is there a existing relatively inexpensive solution for controlling the lens using the Elphel camera? After doing some looking around I have not found anything that fits the bill but before I go and try to reinvent the wheel I thought I would ask to make sure there was not a obvious solution I was overlooking.
My current plan is to build a circuit interfaced to a arduino and connect to the camera in the case of the NC353L-369 camera or if we end up going without the 10369 board then use a netduino (or arduino with a network shield) and communicate via the network. Input would be appreciated! Shane
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
