Hello David, Auto-negotiation between raspbery-pi and Elphel 353 with a power-injector in the middle may not work. Please try to manually set the network link using mii-tool on Raspbery-pi.
Regards, Alexandre On Mon, Oct 29, 2012 at 6:03 PM, David Haberthür <[email protected]> wrote: > Dear All. > I intend to run an Elphel NC353L [1] on a Raspberry Pi [2], but run into > troubles with the connection. Whenever I connect the camera via Ethernet, > the yellow LED starts to blink, but I cannot connect to the camera with the > Browser. Whenever I ping the camera on 192.168.0.9, the green LED > periodically blinks, but the terminal of the Raspberry Pi complains that the > "host is unreachable". > Whenever I plug the Ethernet cable into my Macbook Pro I get a connection > without troubles. Do I need to configure the Ethernet port on Debian to talk > to the camera while I don't need to do that on OS X? Whenever I connect a > LAN cable I can access the web on the Raspberry Pi, just not the camera... > I would be grateful for some help, > David > > [1]: Currently on loan by the "Swiss office" of Elphel, Alexandre Poltorak. > [2]: http://www.raspberrypi.org/ > > -- > Dr. David Haberthür > Swiss Light Source > Paul Scherrer Institut > WBBA/207 > CH-5232 Villigen > +41 56 310 31 80 > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
