oops I'm sorry... Oleg do I need to tell to the parts all the list of components to the sells department at Elphel (you know, making a list of the components as well as the little bolts and screws)? if so, based on the hardware I already have within the Elphel nc353l, what sort of parts and components would I need to list beside the eSATA and the USB connector cards, the new top cover part, as well as the 10369 card?
2013/3/29 Biel Bestué de Luna <7318...@gmail.com> > Oleg how do I aq > > > 2013/3/29 Oleg <support-list@support.elphel.com> > >> Hi, >> >>> Hi, not long ago I acquired the nc353l – 12v kit and for some time it >>> served it's purpose, but now I would like to upgrade the camera to the >>> nc353l – 369 so I can eventually record with an external eSATA HDD, my >>> questions are the following: >>> >> 10369 has a SATA port. >> >>> Since I won't need the CF cards, what parts of hardware do I need to >>> buy from Elphel to make the upgrade from nc353l to nc353l – 369? >>> >> http://www3.elphel.com/wiki/10369 >> 1x10369 board - it comes with adapter for CF cards (103691) and a USB >> adapter (103693). >> >> A camera with 10369 has a different top >> cover<http://wiki.elphel.com/index.php?title=Elphel_camera_parts_0353-11#0353-11-02_-_camera_top_with_connector_holes_for_the_10369_.28serial_port.2C_optoisolated_I.2FO.29.2C_l.3D104.77mm> >> with >> openings for the trigger and console ports. >> To install the USB adapter you would also need a new back >> panel<http://wiki.elphel.com/index.php?title=Elphel_camera_parts_0353-13#0353-13-02_-_Back_Panel.2C_with_holes_for_network.2C_SATA_and_USB_connectors> >> . >> >>> After making the upgrade do I need to change any firmware? >>> >> No >> >> Best regards, >> Oleg Dzhimiev >> Electronics Engineer >> phone: +1 801 783 5555 x124 >> Elphel, Inc. > > >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
