Hello, 1. Try (enter correct ip address for 10353): http://community.elphel.com/bootblock353/ read GPS - this will show if there's connection with the GPS board. read IMU
Please, send the xml it shows - if any Example: > <board> > <brand>Elphel</brand> > <model>103696</model> > <rev>A</rev><serial>F30002</serial> > <time>1379539370</time> > <port>2</port> > <part>GPS18x-5Hz</part> > <baud>19200</baud> > <sync>1</sync> > </board> 2. http://camera-ip:8081/meta Any results here? 3. fpcf -imu 10000 | grep "1:" - displays sentences from GPS receiver (fpcf -imu 10000 | grep "0:" - from IMU) Output? 4. Also: There should be /etc/imu_logger.xml Please send it. if 1. & 2. work ok then it should be something with the logger's config. On 25 April 2014 05:44, Alexandre Poltorak <a.polto...@foxel.ch> wrote: > Hi, > > our PHG (mono) camera do not seems to detect GPS anymore. We have IMU, but > no GPS. > Is it possible to check for the 103696 connection without disassembling > the camera ? > > Best regards, > Alexandre Poltorak > CTO > > Office: +41 22 341 3300 > Mobile: +41 79 696 4225 > Email: a.polto...@foxel.ch > Web: www.foxel.ch > > FOXEL SA > Chemin de Champ-Claude 10 > 1214 Vernier, Geneva, Switzerland > > _______________________________________________ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > -- Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 5555 x124 Elphel, Inc.
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
