Hi, 1. Does the camera get warm when left "powered" for 5-10 minutes?
2. Can you test if power supply works? 3. So you have an interface board (10369 <http://wiki.elphel.com/index.php?title=10369> with SATA, USB and extra 2 connectors on the side) installed? Do you have a serial cable? It consists of a RS-232 Adapter/Cable and USB to RS-232 converter cable - http://wiki.elphel.com/index.php?title=Camera_Accessories If yes. Could you try to connect the camera (J16 - it's the biggest white one on this picture <http://wiki.elphel.com/index.php?title=File:10369_top_sm.jpeg>) to your PC's USB: PC: a. Install a program called "minicom" b. Set the device to ttyUSB0 or the one under which the converter is detected. c. Set settings: Speed: 115200 8N1 RTS/CTS: None XON/XOFF : None Camera: d. Power on and check if there's any output. Please send the results. Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 5555 x124 Elphel, Inc.
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
