Yakov, It should definitely be possible to attach M39 adapter to NC323-2 - lens mount is a separate part so you just need to calculate the distance and make that simple part. Current F-mount is attached from the outside, you do not even need to open the camera.
Andrey ---- On Sat, 02 Jul 2016 18:26:45 -0700 Yakov <queila...@gmail.com> wrote ---- Hello Andrey. I need to attach 3 Rodenstock 50mm f2.8 Apo-Rodagon N (with M39 lens mount) to Elphel NC323-2 cameras that have different mounts. C-Mount, N-mount etc. What will be your advice? Can be M39 lens mount be produced for NC323-2? Regards, Iakov(Yakov) Petrov. On Mon, Aug 24, 2015 at 11:24 PM, support-list <support-list@support.elphel.com> wrote: > Hello Yakov, > > The 10393 boards (main boards of the NC393 cameras) are hardware-compatible > with the older sensor boards. The new system board has 4 identical ports > each with the pinout compatible with 10313, 10333 and 10353 boards. The new > camera will also support modern serial sensor interfaces, but the bakward > compatibility will be 100% preserved - with the flexibility of FPGA it is > not that difficult. > > I just finished simulation of the camera FPGA (comparing against 10353 with > the same sensor data) and now I'm starting to test it on the actual hardware > > > Andrey > > Hello. Will NC393 boards will be backward compatible with 323 hardware? > > Best regards, > Yakov Petrov. > _______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
