Hi Andrey, Thank you. In that case I will need to purchase the 10389 board.
Kind regards, *Richard Rigby* Software Developer www.redzone.com Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand On 22 March 2018 at 12:54, Elphel Support <support-list@support.elphel.com> wrote: > Richard, > > Sorry it was not easy to find on our wiki, I added cross-links: > https://wiki.elphel.com/wiki/Trigger_393 > https://wiki.elphel.com/wiki/103891 > > 10389 is needed to generate trigger output. There are two types of trigger > output to generate it: > 1. 5V/0.5A non-isolated, referenced to the camera GND. > 2. Opto-isolated through opto-transistor > > Output can be either synchronized to the images or just manual as GPIO. > > Andrey > > ---- On Wed, 21 Mar 2018 15:49:56 -0700 *Richard Rigby<rri...@redzone.com > <rri...@redzone.com>>* wrote ---- > > Hi, > > I would like to connect an external circuit to the camera trigger output, > where is the trigger output? Can I connect directly to the main board or to > the 10389 interface board? > > Kind regards, > > *Richard Rigby* > Software Developer > > > www.redzone.com > > Ph: +64 9 479 9901 > > Fax: +64 9 479 9904 > > > 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand > <https://maps.google.com/?q=13+Tarndale+Grove+%E2%80%A2+Albany+%E2%80%A2+Auckland+0632+%E2%80%A2+New+Zealand&entry=gmail&source=g> > _______________________________________________ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > > > >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com