Hi, so we need to buy a 103696 board. after we have the board, we need to open > the shell to connect to j8 and j9，but then we will not be able to close the > shell，right? can you give an instructions of how to connect that board to > 10393 camera.
No shell. J8 and J9 are physical connectors - please, check with PCB schematics - https://wiki.elphel.com/wiki/10389 - there's link to 10389b.pdf. Or inspect the 10389 board you have - they are in the 'front' on the same side as SSD. Connect: GPS receiver > 103696 > 10389, then boot the camera and it's supposed to work. Could you send a picture of the connector on the cable end of your GPS receiver? Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 5555 x124 Elphel, Inc.
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
