Hi, Andrey!
    Thany you for your patience to answer our questions!
    I have some new questions about external trigger. When I set the trigger 
parameter as the page 
http://192.168.0.9/parsedit.php?sensor_port=0&immediate&TRIG_CONDITION=0x95555&TRIG_OUT=0x66555&TRIG_PERIOD=10000000&TRIG=4,<http://192.168.0.9/parsedit.php?sensor_port=0&immediate&TRIG_CONDITION=0x95555&TRIG_OUT=0x66555&TRIG_PERIOD=100000000&TRIG=4,>
 and I made the trigger board pulsing out the signal(10HZ), I found we could 
get 10 images. But I stopped the trigger board signal, I also could update the 
image(10hz). I wanted to konw that how can I test the external trigger signal 
work? Because when i stop external source trigger signal, it could receive 
images too.

________________________________
-----------------------------------------------------------
Best Regrad!
Yicheng-Zhang
Email:  winston.zhang@bst<mailto:winston.zh...@blacksesame.com.cn>.ai
Tel:    18516291005
Black Sesame Technologies (Shanghai) Co., Ltd.  www.bst.ai<http://www.bst.ai/>
Rm 1102-1108, Bldg36, No.2777, East Jinxiu Rd, Pudong District, Shanghai, China

发件人: Oleg<mailto:support-list@support.elphel.com>
发送时间: 2018-09-19 02:38
收件人: david.zh...@bst.ai<mailto:david.zh...@bst.ai>
抄送: winston.zh...@bst.ai<mailto:winston.zh...@bst.ai>; 
tao.zh...@bst.ai<mailto:tao.zh...@bst.ai>; Qun 
Gu<mailto:qun...@blacksesame.com>; elphel 
support-list<mailto:support-list@support.elphel.com>
主题: Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: sync stereo with lidar
Hello,

Here are a couple commands (in linux) that can help to check and sync the 
system clock:
- Compare PC and camera clock:
~$ ssh root@192.168.0.9<mailto:root@192.168.0.9> date;date -u
- Write PC time into camera clock:
~$ ssh root@192.168.0.9<mailto:root@192.168.0.9> "date -s @`( date -u +"%s" )` 
&&  hwclock -w"

After setting the system clock check if the time survives the reboot. If it 
does not - then please update the firmware to 
20180511<https://wiki.elphel.com/wiki/10393_manual#Firmware.2Fsoftware_update>. 
There was a bug in the clock driver we had to fix a while ago.

Regards,
Oleg

On Mon, Sep 17, 2018 at 11:27 PM David Zhang 
<david.zh...@bst.ai<mailto:david.zh...@bst.ai>> wrote:

Hi, Andrey,


We use default configuration(TRIG=4 and TRIG_PERIOD=25000000). Is that OK? And 
now our situation is there are timestamps in EXIF header. But it is not

the kernel's system time.

e.g. the timestamp in EXIF may be 2018/09/14 but actually system's date is 
2018/09/18.

How can i fix it? Thanks.


Best,

David




________________________________
发件人: Elphel Support 
<support-list@support.elphel.com<mailto:support-list@support.elphel.com>>
发送时间: 2018年9月18日 10:03:19
收件人: Winston Zhang
抄送: Winston Zhang; Tao Zhang; Qun Gu; David Zhang
主题: Re: [Elphel-support] 答复: 答复: 答复: 答复: sync stereo with lidar

Winston,

What trigger settings do you use ( https://wiki.elphel.com/wiki/Trigger_393 )?
Trigger 393 - ElphelWiki - 
wiki.elphel.com<https://wiki.elphel.com/wiki/Trigger_393>
wiki.elphel.com<http://wiki.elphel.com>
Description. 10389 board is required. The triggering is used for one or several 
cameras synchronization or setting the frame rate (or fps). The conditions of 
the trigger can be generated either internally or externally.




Camera channels should be in triggered mode (TRIG=4) and have  correct 
TRIG_PERIOD. Then all channels will be exactly synchronized. If you set 
TRIG_PERIOD to some "even" number (like exactly  10fps with 
TRIG_PERIOD=10000000), then timestamps will have all digits but seconds and 
tenths of a second the same for all frames.

Andrey


---- On Mon, 17 Sep 2018 18:31:26 -0700 
<winston.zh...@bst.ai<mailto:winston.zh...@bst.ai>> wrote ----

Hi, Andrey!
    I captured some images form camera with the timestamp image name. This 
timestamp was the same with camera system timestamp. And the other way,  each 
image had its exif information that contained the real timestamp. But this 
timestamp from exif information was not the same with system timestamp. So can 
you provided some detials about where was the exif timestamp  from. And how did 
i do can solve this problem.

(i had synchronized the camera system time with the GPS timestamp.)

________________________________


-----------------------------------------------------------

Best Regrad!

Yicheng-Zhang

Email:  winston.zhang@bst<mailto:winston.zh...@blacksesame.com.cn>.ai

Tel:    18516291005

Addr:   707 room, 7th floor, building 4th, No.1761, Zhangdong road, Pudong area


发件人: Oleg<mailto:support-list@support.elphel.com>
发送时间: 2018-05-12 06:32
收件人: Winston Zhang<mailto:winston.zh...@blacksesame.com.cn>
抄送: Tao Zhang<mailto:tao.zh...@blacksesame.com.cn>; Qun 
Gu<mailto:qun...@blacksesame.com>; David 
Zhang<mailto:david.zh...@blacksesame.com.cn>; elphel 
support-list<mailto:support-list@support.elphel.com>
主题: Re: [Elphel-support] 答复: 答复: 答复: 答复: sync stereo with lidar
Winston,

I could get the info from the 192.168.0.9:2323<http://192.168.0.9:2323>. This 
web could help me to get some information. But if I tried the 
http://192.168.0.9:2323/timestamp_name, the timestamp file saved web did not 
appear. How did I use it?

http://192.168.0.9:2323/pointer_value/img

Try the following:
1. get 
diagnostics.php<https://git.elphel.com/Elphel/elphel-web-393/blob/master/src/diagnostics/diagnostics.php>
2. copy to 192.168.0.9:/www/pages/
3. In the browser open:
view-source:http://192.168.0.9/diagnostics.php?pointers

You will get xml output similar to this one:
<?xml version='1.0' standalone='yes'?>
<Document>
<camera ip='192.168.0.9'>
<port index='0' sensor='mt9p006, none, none, none' mux='none'>
<timestamps>
                        ...
<ts frame='7290' ts='1526075540.347616' 
ptr='pointer_value'>1526075540.347616</ts>
...

Take the pointer_value from the last <ts> for a particular port. Don't forget 
to add "/img" or "/bimg".

If something does not work. Please send me your xml.

Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 5555 x124
Elphel, Inc.
_______________________________________________
Support-list mailing list
Support-list@support.elphel.com<mailto:Support-list@support.elphel.com>
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com



_______________________________________________
Support-list mailing list
Support-list@support.elphel.com<mailto:Support-list@support.elphel.com>
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com

_______________________________________________
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com

Reply via email to