On 06/07/2011 05:22 PM, Paul Bergsagel wrote: > Does anyone know if SeaMonkey 2.1 is ready to use IPv6.
Yes. I've no problem using IPv6 with SeaMonkey 2.x. You can test here: http://test-ipv6.com/ I am suspecting > SeaMonkey can use IPv6, but am not sure. Unfortunately my ISP Shaw has > not updated to IPv6. Rumour is that Shaw will only update to IPv6 when > IPv6 addresses have run out. I wonder how many internet sites have the > same plan to wait until IPv4 addresses have run out before upgrading to > IPv6? > > BTW if you cannot connect to Google on June 8, 2011 (World IPv6 Day) > than either your ISP has not upgraded to IPv6, or your computer needs to > be configured for IPv6, or both. Google has an issue with there IPv6 browser site: http://ipv6.google.com/ results in an error. However: $ ping6 ipv6.google.com PING ipv6.google.com(2001:4860:4001:803::1013) 56 data bytes 64 bytes from 2001:4860:4001:803::1013: icmp_seq=1 ttl=58 time=377 ms 64 bytes from 2001:4860:4001:803::1013: icmp_seq=2 ttl=58 time=15.5 ms 64 bytes from 2001:4860:4001:803::1013: icmp_seq=3 ttl=58 time=15.0 ms works. So use: http://test-ipv6.com/ instead. Note: I use Teredo as my IPv6. _______________________________________________ support-seamonkey mailing list [email protected] https://lists.mozilla.org/listinfo/support-seamonkey
