Hi,
I see you are running freenet on port 19114. I would suggest you to change
this.
Next, I see that you try to connect on port 2192 and so on ?
Thats not logical to me.
Do you have any firewall installed ?
Do you have tried with a clean installation in a new directory ?
transient yes or no ?
If you use MFtools with an mftools.ini there area Parameter simrequests=
If this not help please post your freenet.ini and flaunch.ini
M.
At 15:27 28.5.2001 -0400, tech wrote:
>I finally changed over to 0.3.9.1 from 0.3.8.1.
>
>I am getting this error message after the node is running for sometime.
>I did not have this problem when I was using 0.3.8.1.
>Is there a setting for connection limit?
>
>===============================
>Freenet Core running on 19114 (build 391)
>........
>Accepted privileged connection: tcp/127.0.0.1:2192 on an unpooled thread
>(connection limit reached)
>Accepted privileged connection: tcp/127.0.0.1:2193 on an unpooled thread
>(connection limit reached)
>Accepted privileged connection: tcp/127.0.0.1:2194 on an unpooled thread
>(connection limit reached)
>Rejected connection:tcp/216.228.5.63:4717 (connection limit reached)
>Rejected connection:tcp/137.226.116.8:41912 (connection limit reached)
>Rejected connection:tcp/199.190.239.221:3871 (connection limit reached)
>==============================
>
>Then I have restart freenet
>
>Regards,
>[EMAIL PROTECTED]
>
>
>_______________________________________________
>Support mailing list
>[EMAIL PROTECTED]
>http://lists.freenetproject.org/mailman/listinfo/support
_______________________________________________
Support mailing list
[EMAIL PROTECTED]
http://lists.freenetproject.org/mailman/listinfo/support
