Are you sure you can accept incoming connections? On Tue, Oct 22, 2002 at 05:01:03PM -0600, colbyd wrote: > [Freenet node] > # Freenet configuration file > # This file was automatically generated by WinConfig on 10/22/02 > > # Note that all properties may be overridden from the command line, > # so for example, java Freenet.Node --listenPort 10000 will cause > # the setting in this file to be ignored > > > ######################## > # Normal entries > ######################## > > # The byte size of the datastore cache file. Note that it will maintain > # a fixed size. If you change this or the storePath field following, > # your entire datastore will be wiped and replaced with a blank one > storeSize=581959680 > > # The path to a single file (including file name, or a comma-separated list > of files, > # containing the data store. The size of each file is given by <storeSize>. > # Defaults to cache_<port> in the main freenet directory. > #storeFile= > > # Transient nodes do not give out references to themselves, and should > # therefore not receive any requests. Set this to yes only if you are > # on a slow, non-permanent connection. > transient=false > > # The port to listen for incoming FNP (Freenet Node Protocol) connections on. > listenPort=27757 > > # The I.P. address of this node as seen by the public internet. > # This is needed in order for the node to determine its own > # NodeReference. > ipAddress=bt00v01.Colorado.EDU > > # The directory to store any temporary files created by the node. It gets > deleted > # automatically on node start and stop. > tempDir=C:\WINDOWS\TEMP\freenet\ > > # This is used only by Windows configurator, not by node > warnPerm=true > > > ######################## > # Advanced Entries > ######################## > > # set to yes if you want your node to announce itself to other nodes > doAnnounce=yes > > # file containing initial node references > seedFile=seednodes.ref > > # The port to listen for local FCP (Freenet Client Protocol) connections on. > clientPort=8888 > > # The maximum number of bytes per second to transmit, totaled between > # incoming and outgoing connections. Ignored if either inputBandwidthLimit > # or outputBandwidthLiit is nonzero. > bandwidthLimit=0 > > # If nonzero, specifies an independent limit for outgoing data only. > # (overrides bandwidthLimit if nonzero) > outputBandwidthLimit=0 > inputBandwidthLimit=0 > > #A comma-separated list of hosts which are allowed to talk to node via FCP > fcpHosts=127.0.0.1,localhost > > # The hops that initial requests should make. > initialRequestHTL=15 > > # If this is set then users that can provide the password can > # can have administrative access. It is recommended that > # you do not use this without also using adminPeer below > # in which case both are required. > #adminPassword= > > # If this is set, then users that are authenticated owners > # of the given PK identity can have administrative access. > # If adminPassword is also set both are required. > #adminPeer= > > # When forwarding a request, the node will reduce the HTL to this value > # if it is found to be in excess. > maxHopsToLive=25 > > # Should we use thread-management? If this number is defined and non-zero, > # this specifies how many inbound connections can be active at once. > maximumThreads=120 > > # The number of connections that a node can keep open at the same time > maxNodeConnections=60 > > > ######################## > # Geek Settings > ######################## > > # The number of attempts to make at announcing this node per > # initial peer. Zero means the node will not announce itself > announcementAttempts=10 > > # The amount of time to wait before initially announcing the node, > # and to base the time the time between retries on. In milliseconds. > announcementDelay=1800000 > > # The value to mutliply the last delay time with for each retry. > # That is, for try N, we weight <announcementDelay>*<announcementDelay>^N > # before starting. > announcementDelayBase=2 > > # announcementPeers: undocumented. > announcementPeers=3 > > # How long to wait for authentication before giving up (in milliseconds) > authTimeout=30000 > > # The interval at which to write out the node's data file > # (the store_<port> file, *not* the cache_<port> file). > checkPointInterval=1200 > > # How long to listen on an inactive connection before closing > # (if reply address is known) > connectionTimeout=180000 > > # The expected standard deviation in hopTimeExpected. > hopTimeDeviation=12000 > > # The expected time it takes a Freenet node to pass a message. > # Used to calculate timeout values for requests. > hopTimeExpected=12000 > > # The number of keys to request from the returned close values > # after an Announcement (this is per announcement made). > initialRequests=10 > > # localAnnounceTargets: undocumented. > > # The number of outstanding message replies the node will > # wait for before it starts to abandon them. > messageStoreSize=50000 > > # What size should the blocks have when moving data? > blockSize=4096 > > # The maximum number of bytes of padding to allow between messages > # and in Void messages. > maximumPadding=65536 > > # The time to wait for connections to be established and > # authenticated before passing by a node while routing out. > # Connections that are by passed are still finished and cached > # for the time set by ConnectionTimeout (in milliseconds). > routeConnectTimeout=10000 > > # The number of unique nodes that can be contained in the routing table. > rtMaxNodes=100 > > # The number of references allowed in the routing table per node. This > # should not be set too high. It is suggested to leave it at 100 for now. > rtMaxRefs=100 > > # The path to the file containing the node's reference to itself, its > # routing table, and the datastore directory. Defaults to store_<port> > # in the storePath directory. > #storeDataFile= > > # The type of store we have (this text will get clearer soon). > storeType=freenet > > # The name of a symmetric cipher algorithm to encrypt the datastore > # contents with. Supported algorithms are "Twofish", "Rijndael", > # and "null", "none", or "void" (for no encryption). > storeCipherName=Twofish > > # The width in bits of the cipher key to use for the datastore. > # The allowed values for this will depend on the cipher algorithm. > # Twofish allows 64, 128, 192, or 256, while Rijndael allows > # 128, 192, or 256. > storeCipherWidth=128 > > > ######################## > # Diagnostics Settings > ######################## > # The name of the log file (`NO' to log to standard out) > logFile=freenet.log > > # The error reporting threshold, one of: > # Error: Errors only > # Normal: Report significant events > # Minor: Report minor events > # Debug: Report events only of relevance when debugging > logLevel=Normal > > #A template string for log messages. All non-alphabet characters are > # reproduced verbatim. Alphabet characters are substituted as follows: > # d = date (timestamp), c = class name of the source object, > # h = hashcode of the object, t = thread name, p = priority, > # m = the actual log message > logFormat=d (c, t): m > > # The directory in which to cache diagnostics data. > diagnosticsPath=.freenet/stats > > # The diagnostics module receives and aggregates statistics aboutFreenet's > performance. > # This will eat some gratuitous memory and cpubut may let you provide > valuable data to the project. > doDiagnostics=yes > > logInboundContacts=true > logOutboundContacts=true > logInboundRequests=true > logOutboundRequests=true > > > ######################## > # Services & Servlets > ######################## > services=mainport,nodestatus > > ######################## > # Mainport settings > ######################## > mainport.class=freenet.interfaces.servlet.MultipleHttpServletContainer > mainport.port=8888 > mainport.params.servlet.1.params.insertHtl=15 > mainport.params.servlet.1.params.requestHtl=15 > mainport.params.servlet.1.params.filter=true > mainport.params.servlet.1.params.passThroughMimeTypes=text/plain,image/jpeg, > image/gif,image/png > mainport.params.servlet.1.params.pollForDroppedConnection=true > mainport.params.servlet.1.params.splitFileRetryHtlIncrement=20 > mainport.params.servlet.1.params.splitFileRetries=1 > mainport.params.servlet.1.params.splitFileThreads=10 > mainport.params.servlet.1.params.showNewBuildWarning=true > > ######################## > # Node information servlet settings > ######################## > mainport.params.servlet.2.params.class=freenet.node.http.NodeInfoServlet > mainport.params.servlet.2.params.port=8890 > failureTableSize=1000 > failureTableTime=1800000 > > ######################## > # Node status servlet settings > ######################## > nodestatus.class=freenet.client.http.NodeStatusServlet > nodestatus.port=8889 > > # Unknown parameters - these are not yet known or handled by the NodeConfig > # utility, but are assumed to be valid and understandable to the node > # if you see this in the file, then please email the parameters following > # this comment header to [EMAIL PROTECTED], to prompt the developers > # into updating this configuration utility - thanks > > mainport.params.servlet.2.params.class=freenet.node.http.NodeInfoServlet > mainport.params.servlet.2.params.port=8890 > nodestatus.class=freenet.client.http.NodeStatusServlet > nodestatus.port=8889 > mainport.params.servlet.2.params.class=freenet.node.http.NodeInfoServlet > mainport.params.servlet.2.params.port=8890 > nodestatus.class=freenet.client.http.NodeStatusServlet > nodestatus.port=8889 > mainport.params.servlet.2.params.class=freenet.node.http.NodeInfoServlet > mainport.params.servlet.2.params.port=8890 > nodestatus.class=freenet.client.http.NodeStatusServlet > nodestatus.port=8889 > mainport.params.servlet.2.params.class=freenet.node.http.NodeInfoServlet > mainport.params.servlet.2.params.port=8890 > nodestatus.class=freenet.client.http.NodeStatusServlet > nodestatus.port=8889 > mainport.params.servlet.2.params.class=freenet.node.http.NodeInfoServlet > mainport.params.servlet.2.params.port=8890 > nodestatus.class=freenet.client.http.NodeStatusServlet > nodestatus.port=8889 > mainport.params.servlet.2.params.class=freenet.node.http.NodeInfoServlet > mainport.params.servlet.2.params.port=8890 > nodestatus.class=freenet.client.http.NodeStatusServlet > nodestatus.port=8889 > mainport.params.servlet.2.params.class=freenet.node.http.NodeInfoServlet > mainport.params.servlet.2.params.port=8890 > nodestatus.class=freenet.client.http.NodeStatusServlet > nodestatus.port=8889 > mainport.params.servlet.2.params.class=freenet.node.http.NodeInfoServlet > mainport.params.servlet.2.params.port=8890 > nodestatus.class=freenet.client.http.NodeStatusServlet > nodestatus.port=8889 > mainport.params.servlet.2.params.class=freenet.node.http.NodeInfoServlet > mainport.params.servlet.2.params.port=8890 > nodestatus.class=freenet.client.http.NodeStatusServlet > nodestatus.port=8889 > fproxy.params.FECDecoder_0_name=OnionDecoder_0 > fproxy.params.FECDecoder_0_class=OnionFECDecoder > fproxy.params.FECEncoder_0_name=default_encoder > fproxy.params.FECEncoder_0_class=OnionFECEncoder > fproxy.params.FECEncoder_1_name=OnionEncoder_0 > fproxy.params.FECEncoder_1_class=OnionFECEncoder > > > > > _______________________________________________ > support mailing list > [EMAIL PROTECTED] > http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support >
-- Matthew Toseland [EMAIL PROTECTED] [EMAIL PROTECTED] Freenet/Coldstore open source hacker. Employed full time by Freenet Project Inc. from 11/9/02 to 11/11/02. http://freenetproject.org/
msg01563/pgp00000.pgp
Description: PGP signature
