I've noticed that the stable build does not open as many connections at the unstable build. When I start the stable build, it will make 3 or 4 connections at first and then just sit there. Slowly it will build more connections. When I launch the unstable build, it will immediately have 20 or more connections open. What could be the problem?


Stable 5082

Connections open (Inbound/Outbound/Limit)       13 (0/13/60)
Transfers active (Transmitting/Receiving)       18 (18/0)
Data waiting to be transferred  942 Bytes
Total amount of data transferred        143 MiB

Uptime: 0 days, 7 hours, 1 minute
Current routingTime: 0ms.
Pooled threads running jobs: 2 (1.7%)
Pooled threads which are idle: 26
Current estimated load for rate limiting: 10%.
Load due to thread limit = 1.7%
Load due to routingTime = 10% = 100ms / 1000ms <= overloadLow (50%)
Load due to messageSendTimeRequest = 10% = 100ms / 1000ms <= overloadLow (50%)
Load due to output bandwidth limiting = 0% because outputBytes(0) <= limit (672000.01 ) = outLimitCutoff (0.8) * outputBandwidthLimit (14000) * 60
Load due to expected inbound transfers: 0% because: 0.0 req/hr * 0.027857298366589584 (pTransfer) * 391846.0 bytes = 0 bytes/hr expected from current requests, but maxInputBytes/minute = 1080000 * 60 * 1.1 = 71280000 bytes/hr target
Current estimated load for QueryRejecting: 1.7%.




Unstable 60106

Connections open (Inbound/Outbound/Limit)       34 (0/34/60)
Transfers active (Transmitting/Receiving)       152 (152/0)
Data waiting to be transferred  18 KiB
Total amount of data transferred        None

Uptime: 0 days, 7 hours, 1 minute
Current routingTime: 0ms.
Pooled threads running jobs: 2 (1.7%)
Pooled threads which are idle: 26
Current estimated load for rate limiting: 10%.
Load due to thread limit = 1.7%
Load due to routingTime = 10% = 100ms / 1000ms <= overloadLow (50%)
Load due to messageSendTimeRequest = 10% = 100ms / 1000ms <= overloadLow (50%)
Load due to output bandwidth limiting = 0% because outputBytes(0) <= limit (672000.01 ) = outLimitCutoff (0.8) * outputBandwidthLimit (14000) * 60
Load due to expected inbound transfers: 0% because: 0.0 req/hr * 0.027857298366589584 (pTransfer) * 391846.0 bytes = 0 bytes/hr expected from current requests, but maxInputBytes/minute = 1080000 * 60 * 1.1 = 71280000 bytes/hr target
Current estimated load for QueryRejecting: 1.7%.
_______________________________________________
Support mailing list
[EMAIL PROTECTED]
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:[EMAIL PROTECTED]

Reply via email to