On Mon, Jul 19, 2004 at 03:37:41PM +0300, Roger Oksanen wrote: > I run freenet niced at +10 on a 2x500MHz computer, load stays at 2-3 all > the time. > I suspect the problem you have lies in the fact that freenet will eat > ALL available bandwidth that you give it, which will lead to > starvation, so adjust the following settings: > > inputBandwidthLimit= <Your input limit> > outputBandwidthLimit= <Your output limit> > > Its in bytes/s. You should not allocate your whole bandwidth to freenet, > leave at least some 10% to other traffic.
I recommend allocating no more than half. Thus if you have an uplink of 256kbps, set: outputBytes=16000 I doubt that inputBandwidthLimit matters that much.. but if you have a symmetric connection, set it. > > You could also limit the threads used by adjusting the maximumThreads > setting. -- Matthew J Toseland - [EMAIL PROTECTED] Freenet Project Official Codemonkey - http://freenetproject.org/ ICTHUS - Nothing is impossible. Our Boss says so.
signature.asc
Description: Digital signature
_______________________________________________ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
