Edward J. Huff wrote:
I don't have internewt connection problems, as i can browse the internet, download, whatever!Heine Laursen wrote:
Couldn't retrieve key: [EMAIL PROTECTED]/TFE//These lines tell you that your node couldn't send the request to any node. This is usually caused by having no node references or connection problems.
Hops To Live: 15
Error: Route Not Found
Attempts were made to contact 0 nodes.
0 were totally unreachable.
0 restarted.
0 cleanly rejected.
0 backed off.
He meant freenet connection problems: all zeros in that message means
you aren't connected to any other freenet nodes. Verify this by looking
at
http://127.0.0.1:8888/servlet/nodestatus/ocmContents.html?setSorting=-14&setMode=Connection&setLevel=2
Then i get this:
Connections [Switch to peers mode]
Sun Aug 01 18:07:41 CEST 2004
[Less details]
Connections open (Inbound/Outbound/Limit) 21 (5/16/200)
Transfers active (Transmitting/Receiving) 26 (1/25)
Data waiting to be transmitted/received None/None
Amount of data transmitted/received over currently open connections 4,923 KiB/3,514 KiB
Total amount of data transmitted/received 7,912 KiB/4,204 KiB
Number of distinct nodes connected 21
Outbound connections legend Inbound connections legend
Idle Idle
Transmitting data Transmitting data
Receiving data Receiving data
Receiving and transmitting data Receiving and transmitting data
Messages transferred Type Sent (failed)/Received (failed)
DataNotFound 215 (4)/41 (0)
InsertReply 3 (0)/1 (0)
StoreData 4 (0)/4 (0)
Accepted 4583 (24)/66 (0)
QueryRestarted 35 (0)/21 (0)
InsertRequest 3 (0)/124 (0)
DataReply 7 (0)/4 (0)
DataInsert 1 (0)/84 (0)
QueryRejected 4352 (79)/54 (0)
DataRequest 111 (0)/4535 (0)
QueryAborted 0 (0)/4 (0)
Try downloading http://freenetproject.org/snapshots/seednodes.ref.bz2, decompress it and put it into Freenet's directory.
Ok, tryed that. Still the same problem.
Also, check the bandwidth limit from your config file. It should be in bytes/second, not kilobytes/second.Okay i have deleted freenet.conf, and genereted a new where i accept all the defaults settings.
Still the same problem!
Actully, i can now get the GPL licence, but no other links works!??
That is a good sign. 5088 has RNF problems. I imagine everyone sees
them.
Then i have to wait for a new release.
Sincerley Heine Laursen
_______________________________________________ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
