Hello:
I am trying to run freenet on Solaris 10 (3/05) for Sparc.
I have downloaded the archive and validated that it is intact. When I
run freenet for the first time, the installer builds the freenet.conf
file, but the application fails with the following error:
start-freenet.sh: test: unknown operator ==
The start-freenet.sh script produced a few informational messages that
might be important, might be not. Here is the output of the session:
(BTW I used the default options)
$ sh start-freenet.sh
Detected freenet-ext.jar
Detected freenet.jar
It appears that this is your first time running Freenet. You
should read the README file as it contains important instructions
and advice.
First we must generate a freenet.conf file. I will now run
Freenet in configure mode, and it will ask you a number of
questions. If you don't understand the question, hitting enter
without typing anything will go with the default which is likely
to be the right thing.
no random in shell, enter a FNP port number + <ENTER>
Freenet Configuration
Running in simple mode. Some preferences will be skipped.
You can choose the default preferences by just hitting <ENTER>
Setting: listenPort
The port to listen for incoming FNP (Freenet Node Protocol) connections on.
INFO: Native CPUID library jcpuid not loaded, reason: 'Dont know
jcpuid library name for os type 'SunOS'' - will not be able to read
CPU information using CPUIDINFO: Native BigInteger library jbigi not
loaded, reason: 'Dont know jbigi library name for os type 'SunOS'' -
using pure java
Config error: listenPort= - Value could not be parsed - format error
perhaps? - expected Integer (whole number, up to 2,147,483,648, kKmMgG
accepted - example 2.1m = 2,100,000) - detail:
java.lang.NumberFormatException: empty String
java.lang.NumberFormatException: empty String
at
sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:994)
at java.lang.Double.parseDouble(Double.java:482)
at freenet.config.Params.parseInt(Params.java:413)
at freenet.config.Params.getInt(Params.java:383)
at freenet.config.Setup.setParam(Setup.java:463)
at freenet.config.Setup.dumpConfig(Setup.java:210)
at freenet.node.Main.main(Main.java:420)
listenPort [64490]
Setting: seedFile
A file containing one or more node references which will be incorporated
into the node's routing table on startup. A reference is only added if
there is no previously existing reference to that node. When this node
announces, it will announce to the nodes listed in this file.
seedFile [seednodes.ref]
Setting: storeSize
The byte size of the data store directory.
The maximum sized file that will be cached is 1/100th of
this value. We recommend the default 256MB, to cache the largest common
file size on freenet, 1MB plus some headers, with plenty of elbowroom, but
any size about 101MB should be adequate (a 1MB chunk is not exactly 1MB...).
Note that if you increase settings such as maximumThreads, you may need to
use a larger store.
storeSize [268435456]
Setting: inputBandwidthLimit
If nonzero, specifies an independent limit for incoming data only, in bytes
per second. A 512kbps broadband (DSL or cable) connection is 64kB/sec, but
you may want to use other things than Freenet on it. However, Freenet's
background usage should be close to the output limit most of the time.
You may want to set this and then set doLowLevelInputLimiting=false, in
order to have more accurate pending-transfers load. You SHOULD do this if
your connection has more outbound than inbound bandwidth.
inputBandwidthLimit [0]
Setting: outputBandwidthLimit
If nonzero, specifies an independent limit for outgoing data only, in bytes
per second. Not entirely accurate. If you need exact limiting, do it at the
OS level. A typical broadband connection has either a 128kbps or a 256kbps
uplink, this equates to 16kB/sec and 32kB/sec respectively. You will need to
keep some bandwidth back for other apps and for downloads (yes, downloading
uses a small amount of upload bandwidth). We suggest therefore limits of
12000 for a 128kbps upload connection, or 24000 for a 256kbps upload
connection. Most broadband connections have far more download bandwidth than
upload bandwidth... just because you have 1Mbps download, does not mean you
have 1Mbps upload; if you do not know what your connection's upload speed is,
use one of the above options.
outputBandwidthLimit [12288]
Setting: averageInputBandwidthLimit
If nonzero, specifies an independent limit for incoming data only (averaged
over a week). (overrides averageBandwidthLimit if nonzero)
averageInputBandwidthLimit [0]
Setting: averageOutputBandwidthLimit
If nonzero, specifies an independent limit for outgoing data only (averaged
over a week). (overrides bandwidthLimit if nonzero)
averageOutputBandwidthLimit [0]
Setting: logLevel
The error reporting threshold, one of:
Error: Errors only
Normal: Report significant events, and errors
Minor: Report minor events, significant events, and errors
Debug: Report everything that can be reported
logLevel [normal]
Setting: mainport.params.servlet.7.params.sfDefaultSaveDir
Default folder to save large downloaded files to. Defaults to a folder
called "freenet-downloads" in your home directory.
mainport.params.servlet.7.params.sfDefaultSaveDir
[/export/home/bob/freenet-downloads]
Sun java detected.
Sun Java 1.4.2 detected.
start-freenet.sh: test: unknown operator ==
$ ^D
Script done, file is typescript
$ ls
README freenet.conf.orig seednodes.ref stop-freenet.sh
freenet-ext.jar freenet.jar seednodes.ref.bz2 typescript
freenet.conf preconfig.sh start-freenet.sh update.sh
$ cat typescript
Script started on Thu Feb 17 20:03:37 2005
$ sh start-freenet.sh
Detected freenet-ext.jar
Detected freenet.jar
It appears that this is your first time running Freenet. You
should read the README file as it contains important instructions
and advice.
First we must generate a freenet.conf file. I will now run
Freenet in configure mode, and it will ask you a number of
questions. If you don't understand the question, hitting enter
without typing anything will go with the default which is likely
to be the right thing.
no random in shell, enter a FNP port number + <ENTER>
Freenet Configuration
Running in simple mode. Some preferences will be skipped.
You can choose the default preferences by just hitting <ENTER>
Setting: listenPort
The port to listen for incoming FNP (Freenet Node Protocol) connections on.
INFO: Native CPUID library jcpuid not loaded, reason: 'Dont know
jcpuid library name for os type 'SunOS'' - will not be able to read
CPU information using CPUIDINFO: Native BigInteger library jbigi not
loaded, reason: 'Dont know jbigi library name for os type 'SunOS'' -
using pure java
Config error: listenPort= - Value could not be parsed - format error
perhaps? - expected Integer (whole number, up to 2,147,483,648, kKmMgG
accepted - example 2.1m = 2,100,000) - detail:
java.lang.NumberFormatException: empty String
java.lang.NumberFormatException: empty String
at
sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:994)
at java.lang.Double.parseDouble(Double.java:482)
at freenet.config.Params.parseInt(Params.java:413)
at freenet.config.Params.getInt(Params.java:383)
at freenet.config.Setup.setParam(Setup.java:463)
at freenet.config.Setup.dumpConfig(Setup.java:210)
at freenet.node.Main.main(Main.java:420)
listenPort [64490]
Setting: seedFile
A file containing one or more node references which will be incorporated
into the node's routing table on startup. A reference is only added if
there is no previously existing reference to that node. When this node
announces, it will announce to the nodes listed in this file.
seedFile [seednodes.ref]
Setting: storeSize
The byte size of the data store directory.
The maximum sized file that will be cached is 1/100th of
this value. We recommend the default 256MB, to cache the largest common
file size on freenet, 1MB plus some headers, with plenty of elbowroom, but
any size about 101MB should be adequate (a 1MB chunk is not exactly 1MB...).
Note that if you increase settings such as maximumThreads, you may need to
use a larger store.
storeSize [268435456]
Setting: inputBandwidthLimit
If nonzero, specifies an independent limit for incoming data only, in bytes
per second. A 512kbps broadband (DSL or cable) connection is 64kB/sec, but
you may want to use other things than Freenet on it. However, Freenet's
background usage should be close to the output limit most of the time.
You may want to set this and then set doLowLevelInputLimiting=false, in
order to have more accurate pending-transfers load. You SHOULD do this if
your connection has more outbound than inbound bandwidth.
inputBandwidthLimit [0]
Setting: outputBandwidthLimit
If nonzero, specifies an independent limit for outgoing data only, in bytes
per second. Not entirely accurate. If you need exact limiting, do it at the
OS level. A typical broadband connection has either a 128kbps or a 256kbps
uplink, this equates to 16kB/sec and 32kB/sec respectively. You will need to
keep some bandwidth back for other apps and for downloads (yes, downloading
uses a small amount of upload bandwidth). We suggest therefore limits of
12000 for a 128kbps upload connection, or 24000 for a 256kbps upload
connection. Most broadband connections have far more download bandwidth than
upload bandwidth... just because you have 1Mbps download, does not mean you
have 1Mbps upload; if you do not know what your connection's upload speed is,
use one of the above options.
outputBandwidthLimit [12288]
Setting: averageInputBandwidthLimit
If nonzero, specifies an independent limit for incoming data only (averaged
over a week). (overrides averageBandwidthLimit if nonzero)
averageInputBandwidthLimit [0]
Setting: averageOutputBandwidthLimit
If nonzero, specifies an independent limit for outgoing data only (averaged
over a week). (overrides bandwidthLimit if nonzero)
averageOutputBandwidthLimit [0]
Setting: logLevel
The error reporting threshold, one of:
Error: Errors only
Normal: Report significant events, and errors
Minor: Report minor events, significant events, and errors
Debug: Report everything that can be reported
logLevel [normal]
Setting: mainport.params.servlet.7.params.sfDefaultSaveDir
Default folder to save large downloaded files to. Defaults to a folder
called "freenet-downloads" in your home directory.
mainport.params.servlet.7.params.sfDefaultSaveDir
[/export/home/bob/freenet-downloads]
Sun java detected.
Sun Java 1.4.2 detected.
start-freenet.sh: test: unknown operator ==
$
Any idea what is going wrong?
_______________________________________________
Support mailing list
[email protected]
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:[EMAIL PROTECTED]
