Go here: http://www.openmoko.org/wiki/Flashing_the_Neo_FreeRunner
On Mon, Jul 21, 2008 at 12:03 PM, Spent <[EMAIL PROTECTED]> wrote: > > Hello ladies and gentlemen, > > I got my Freerunner late last week and was initially able to SSH in, > however > I couldn't seem to connect to the internet via USB despite following all > the instructions. One of the last things I did the first night before I > packed it in was try to install the keyboard as the getting started guide > shows how. I followed the directions - removed the multi-tap pad, but due > to dependencies I couldn't install the keyboard. Now I have no keyboard > whatsoever and no way to SSH into the device, it just hangs there and > eventually times out. I was wondering if there was a way to do a factory > reset on this, or if I could somehow change any of the files I messed up on > the neo [possibly etc/network/interfaces]? without SSH, or if there was a > factory reset to default image? Any help is much appreciated. > > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use > Iface > 192.168.1.0 * 255.255.255.0 U 0 0 0 > wlan0 > 192.168.0.0 * 255.255.255.0 U 0 0 0 > usb0 > link-local * 255.255.0.0 U 1000 0 0 > wlan0 > default my.router 0.0.0.0 UG 0 0 0 > wlan0 > > > There's my routing table if it helps - my router is on 192.168.1.1, not > sure > why the usb device is showing as 192.168.0.0 > > Thanks in advance, > > -Zach > -- > View this message in context: > http://n2.nabble.com/How-To-Factory-Reset--tp575479p575479.html > Sent from the Openmoko Support mailing list archive at Nabble.com. > > > _______________________________________________ > support mailing list > [email protected] > https://lists.openmoko.org/mailman/listinfo/support >
_______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
