Hi there, I noticed several times a problem when connecting the FR to a host PC.
When it happens, the (Linux) host won't recognize the Neo as a network device, and -- more annoying -- the Neo won't fast-charge. The only solution I have found is to reboot the FR (and sometimes it isn't enough, last time I had to remove the battery). (I tried with several machines so, a priori, it doesn't seem to be a problem with the host PC.) On the host, the kern logs look like this: kernel: hub 1-0:1.0: unable to enumerate USB device on port 5 kernel: usb 4-1: new full speed USB device using uhci_hcd and address 9 kernel: usb 4-1: new low speed USB device using uhci_hcd and address 10 kernel: usb 4-1: new low speed USB device using uhci_hcd and address 11 kernel: usb 4-1: device not accepting address 11, error -71 kernel: usb 4-1: new low speed USB device using uhci_hcd and address 12 kernel: usb 4-1: device not accepting address 12, error -71 kernel: hub 4-0:1.0: unable to enumerate USB device on port 1 Have you ever seen this? Any advice for the next time it occurs? :) Regards, -- MiKael _______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
