Hi all I just got my freerunner delivered today, but can't get it to boot. I checked this support list and the wiki but can't seem to find anyone with a similar problem. The closest I could find was at http://wiki.openmoko.org/wiki/SH1 but that refers to GTA01, so I don't think it applies to GTA02 (this is my first phone)
An image of the screen is up on: http://i38.tinypic.com/scwgn7.jpg I've tried holding the power button for well over 10 secs to no avail. It is the same with or without the charger. Removing the battery and re-trying also fails. Logging in I get the following: In: usbtty Out: usbtty Err: usbtty PCB rev: 0x001 Power: switching led 2 0 switching led 2 1 switching led 2 0 Hit any key to stop autoboot: 3 DEVICE_CONFIGURED: 1 0 NAND read: mtdparts variable not set, see 'help mtdparts' incorrect device type in kernel 'kernel' is not a number ## Booting image at 32000000 ... Bad Magic Number GTA02v6 # GTA02v6 # DEVICE_CONFIGURED: 1 GTA02v6 # printenv bootcmd=setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000 bootdelay=3 baudrate=115200 usbtty=cdc_acm stderr=usbtty stdout=usbtty stdin=usbtty bootargs_base=rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0 loglevel=8 mtdids=nor0=physmap-flash,nand0=neo1973-nand pcb_rev=0x001 pcf50633_int1=0x88 pcf50633_int2=0x57 bootargs=rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0 loglevel=8 Environment size: 474/262140 bytes GTA02v6 # version U-Boot 1.3.2-rc2-dirty-moko12 (Apr 2 2008 - 09:31:05) GTA02v6 # Do I need to flash NAND/NOR? Any help greatly appreciated! Thanks in advance Kev. _______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
