Konstantin <[EMAIL PROTECTED]> writes: > Hi there! > >>> There's a build date on the menu >> >> Well... should it read "U-Boot 1.3.2-moko12 (May 9 2008 - 10:28:48)" >> on first line, then ? ... I'd expect something closer from now :-/ > > Not sure if that applies to you, but I had the same problem, until I realized > I > was booting to NOR (which you can't update w/o the debug board) instead of > NAND > all the time. Should that be the case for you, too, try booting with > pressing+holding Power first and then pressing and holding AUX while still > holding the power button until your freerunner comes to life. >
Thanks alot. I was indeed booting from NOR (which was indicated in the boot menu, by the way, but I didn't notice). I booted from NAND (following http://wiki.openmoko.org/wiki/Booting#Log_into_U-Boot_in_the_NAND_Flash), and this time, it's OK, displaying "(Aug 4 2008 - 02:33:52)0cab8055084ae25ea4e73b66dd03cc1a0cb" at top of screen ! :-) And connecting through USB console, I get : GTA02v5 # version U-Boot 1.3.2+gitr18+64eb10cab8055084ae25ea4e73b66dd03cc1a0cb (Aug 4 2008 - 02:33:52) Great, I know now in which order to press buttons on the FR ;-) Thanks alot again. -- Olivier BERGER (OpenPGP: 1024D/B4C5F37F) http://www.olivierberger.com/weblog/ _______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
