casaubon wrote: > > > Michael Shiloh wrote: >> >> Hey Jon, >> >> Why introduce another unknown into the equation? I recommend you follow >> Niccolo's advice and follow the instructions at >> http://wiki.openmoko.org/wiki/Flashing_Openmoko >> >> If you can't boot into NAND FLASH, use the failsafe u-boot image in NOR >> FLASH. >> >> > > Can you elaborate, please, Michael? The instructions at > http://wiki.openmoko.org/wiki/Flashing_Openmoko require a working usb > connection, which I cannot seem to get. What operations are required to use > the failsafe NOR u-boot?
You do need USB, but not Ethernet over USB as you describe below. Try this page instead: http://wiki.openmoko.org/wiki/Flashing_the_Neo_FreeRunner Note that all the commands are issued on your host computer and not on the Freerunner. I try to get a usb connection and my host machine > responds: > > # ifconfig usb0 192.168.0.200 netmask 255.255.255.248 > SIOCSIFADDR: No such device > usb0: unknown interface: No such device > SIOCSIFNETMASK: No such device This step is only required when you set up Ethernet over USB. For flashing you do not need Ethernet. _______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
