Ok, I'm getting something pretty odd now with GRPS setup. I'm trying this with 2008.1, which is probably a mistake, but...
I'm getting a connection, and have used cu to tip in and see I'm getting what looks to me to be valid ppp setup packets spit back at me when I enter the commands manually. When I run it through ppp I'm getting the following (via logs). I've never seen this particular error, and am a little confused. I can see that the data coming across starts with ~y} after a manual connect, so I know it's trying to link. What's going on that manually it seems to be working but with pppd it's going 7-bit? Any ideas? =PPP LOG STARTS HERE= Serial connection established. using channel 1 Using interface ppp0 Connect: ppp0 <--> /dev/ttySAC0 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7a79c68b> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7a79c68b> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7a79c68b> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7a79c68b> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7a79c68b> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7a79c68b> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7a79c68b> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7a79c68b> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7a79c68b> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7a79c68b> <pcomp> <accomp>] LCP: timeout sending Config-Requests Connection terminated. Receive serial link is not 8-bit clean: Problem: all had bit 7 set to 0 Serial connection established. using channel 2 Using interface ppp0 Connect: ppp0 <--> /dev/ttySAC0 disconnect script failed sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x68548757> <pcomp> <accomp>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x68548757> <pcomp> <accomp>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x68548757> <pcomp> <accomp>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x68548757> <pcomp> <accomp>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x68548757> <pcomp> <accomp>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x68548757> <pcomp> <accomp>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x68548757> <pcomp> <accomp>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x68548757> <pcomp> <accomp>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x68548757> <pcomp> <accomp>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x68548757> <pcomp> <accomp>] LCP: timeout sending Config-Requests Connection terminated. Receive serial link is not 8-bit clean: Problem: all had bit 7 set to 0 tcflush failed: Bad file descriptor Connect script failed Modem hangup =PPP LOG ENDS= _______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
