Not sure if this is the reason, but I used the OM2008.8 kernel [1] and had no problems with Debian. There are a few minor error messages while the boot sequence, but so far no problem on my GTA02v5. (I remember a complaint about a driver that was only available on gta01).
Thomas [1] http://downloads.openmoko.org/releases/Om2008.8/ Joerg Lippmann wrote: > I tried it just yesternight. It didn't work. > > The SD(HC)-Card was prepard on my main machine like this: > 1. partition: 8MB formatted vfat > for uImage.bin (apart from that: empty). I wasn't sure which kernel-Image to > use so I took one from ASU. > > 2. partition: 2GB formatted ext2. > I copied all the directories from the .tar.bz2 (Prebuilt Filesystem) to this > partition. > > wasn't sure which kernel-Image to use so I took one from ASU. It did indeed > boot, but when the kernel tried to start init, it panicked: > > Kernel panic - not syncing: No init found. Try passing init= option to kernel. > > ... but I really don't know how to do that without screwing up Neo. > > [EMAIL PROTECTED] > _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support