Yeah it's loading the correct openocd.cfg file. I even added random commands to it and i saw those commands in the error messages. I even used -f to be sure.
Lynn On Sun, Aug 31, 2008 at 9:45 PM, Neng-Yu Tu (Tony Tu) <[EMAIL PROTECTED]>wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi Lynn- > > > I was wondering if anyone was using the Neo1973 (GTA01v4) with Debug > > board v3. I used the openocd.cfg available on the wiki and I get this > > problem: > > Info: openocd.c:82 main(): Open On-Chip Debugger (2006-08-01 12:00 > CEST) > > Info: configuration.c:50 configuration_output_handler(): Command > > ft2232_device_desc not found > > Info: configuration.c:50 configuration_output_handler(): Command > > ft2232_layout not found > > Info: configuration.c:50 configuration_output_handler(): Command > > ft2232_vid_pid not found > > Error: jtag.c:1219 jtag_init(): No valid jtag interface found (ft2232) > > > > It seems like openocd is having some trouble with ft2232 because I don't > > see anything wrong with those commands. > > > > Does your openocd load neo1973 specific config? like tmp/openocd -f > tmp/openocd-debugv2.cfg > > Usually it is because your USB vid/pid setting is not correct in the > config file(load the wrong config file) > > Hope this helps. > > = > - -- > Neng-Yu Tu (Tony Tu) > Openmoko, Inc. > Support. > > Some questions could be answered by reference following link: > > Wiki - http://wiki.openmoko.org > Download - http://downloads.openmoko.org > > Freerunner Introduction - > http://wiki.openmoko.org/wiki/Getting_Started_with_your_Neo_FreeRunner > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.9 (MingW32) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org > > iEYEARECAAYFAki7c4MACgkQmV6sZhhBn29BwQCfSRPiSVTPKhPeUAGd1R6m0D80 > 1sIAn1dFiXdIuulTTCqYM6mmfPsRvjJD > =ubFB > -----END PGP SIGNATURE----- > > _______________________________________________ > Openmoko community mailing list > [EMAIL PROTECTED] > http://lists.openmoko.org/mailman/listinfo/community >
_______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
