--- Andy Green <[EMAIL PROTECTED]> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Somebody in the thread at some point said: > | --- "Neng-Yu Tu (Tony Tu)" <[EMAIL PROTECTED]> > wrote: > |> These is marker from factory SMT line for > |> distinguish 900/1800/1900 and > |> 850/1800/1900 phones, not fired :) > | > | thanks! that's a definite releif. However question > | remains - why wouldn't my FreeRunner see microSD? > I'll > | try to locate some "other" microSD card to > testhoping > | it's not controller or something. > > You need to do > > dmesg > > and post it here, it will try to talk to your card > during boot and > should give a clue where it went wrong, if it could > even talk to it at > all, etc.
this is what I was looking for: # grep mmc om_dmesg [ 3.165000] mmcblk0: mmc0:b368 SMI 498176KiB [ 3.170000] mmcblk0:<6>glamo-mci glamo-mci.0: Error after cmd: 0x302 [ 3.180000] mmcblk0: error -84 sending read/write command [ 3.185000] end_request: I/O error, dev mmcblk0, sector 0 [ 3.185000] Buffer I/O error on device mmcblk0, logical block 0 [ 3.195000] glamo-mci glamo-mci.0: Error after cmd: 0x8020 [ 3.195000] glamo-mci glamo-mci.0: Error after cmd: 0x8122 [ 3.200000] mmcblk0: error -84 sending read/write command ... # fdisk /dev/mmcblk0 fdisk: cannot read from /dev/mmcblk0 (same for all 0, 1 and 2 devices) but in case I was looking for the wrong stuff, here's the whole dmesg in attachment.
om_dmesg
Description: 2234517856-om_dmesg
_______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
