-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi xiangfu:
> i receive a new debug board and the serial console is work. > yesterday i try to use openocd but it is not work. > -------------------------------------------------------------------------- > Bus 002 Device 015: ID 0403:6010 Future Technology Devices > International, Ltd FT2232C Dual USB-UART/FIFO IC Your debug board is not programed or been cleaned eeprom, the USB ID is default FTDI ID 0403:6010 > Unable to find FTDI devices under given vendor/product id: 0x1457/0x5118 > Retrying with default FTDI id. > Used eeprom space: 102 bytes > FTDI write eeprom: 0 > Writing to file: neo1973_debug_board_v2.eeprom > FTDI close: 0 > Same problem, it's not 0x1457/0x5118 anymore. so flashing fail. You could modify the openocd.cfg or openocd-debugv2.cfg file , ftdi_vid_pid 0x0403 0x6010 make it work without refresh eeprom into correct USB ID. - -- Neng-Yu Tu (Tony Tu) Openmoko, Inc. Support. Some questions could be answered by reference following link: Wiki - http://wiki.openmoko.org Download - http://downloads.openmoko.org Freerunner Introduction - http://wiki.openmoko.org/wiki/Getting_Started_with_your_Neo_FreeRunner -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkjMiUkACgkQmV6sZhhBn29F/wCgju/n3sC485qQ834W4OKNoPZ9 DYkAn3WeGjH+usBhRqL5oWtvHuAvJzUa =cZVD -----END PGP SIGNATURE----- _______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
