Nelson Castillo wrote:
> On Thu, Nov 6, 2008 at 4:28 PM, Lars Noodén <[EMAIL PROTECTED]> wrote:
>> ...it appears that the connection settings are not correct:
>>
>> $ cu -eo -s 115200 -l /dev/ttyUSB0
>> Connected.
>> [EMAIL PROTECTED]
>>
>> The board is Openmoko Neo1973 v3
> The serial console is in /dev/ttyUSB1 and not in /dev/ttyUSB0.
It's /dev/ttyUSB0. There are no others:
$ ls /dev/ttyU*
/dev/ttyUSB0
"If the board shows up as USB ID 1457:5118, then everything
is correct." (1)
$ lsusb -d 1457:
Bus 004 Device 005: ID 1457:5118 First International
Computer, Inc. OpenMoko Neo1973 Debug board (V2+)
The board should accept 8N1 at 115200 bps, but appears not to even on
systems besides Kubuntu or Debian:
A) In OpenBSD 4.4, if I try connecting, the error is this:
$ cu -s 115200 -l /dev/ttyU0
/dev/ttyU0: Device not configured
link down
Same error trying ttyU[1-3]
The device is there, however:
$ usbdevs -f /dev/usb2
addr 1: UHCI root hub, Intel
addr 2: TUSB2046 hub, Texas Instruments
addr 3: Debug Board for Neo1973, OpenMoko
B) On OS X 10.5, I am also unable to connect with screen. No usbmodem
devices are found when the debug board is plugged in. Though if the
FreeRunner itself is plugged in, that shows up as tty.usbmodem5d11
Regards,
-Lars
(1) http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
_______________________________________________
support mailing list
[email protected]
https://lists.openmoko.org/mailman/listinfo/support
