Have you tried doing Nor Boot with the battery in? On Tue, Nov 11, 2008 at 9:07 PM, Joachim Ott <[EMAIL PROTECTED]> wrote:
> Looks like I have killed the battery of my gat02v6. While I was working on > the PC and having the FR laying besides (running Om2007.2), I noticed the > red LED flashing once in a second. I took out the battery because I couldn't > reboot. I booted from flash (currently with the newest FSO), all looked > normal. When the system was up, I plugged in USB, the screen went black and > the red LED began flashing like above. I took out the battery, measured and > it showed only 2.99V. Then I attached external power, booted Om2007.2 from > SD card, when it was up I connected USB, removed external power and put in > the battery - shortly after the screen went black bla bla rhabarbar... > > With the battery from the other FR (fully loaded, shows 4.35V) everything > is fine again. Have I killed the battery by over-using the device? I boot > about 10 times a day, from flash or SD, playing with GSM, GPS and WLAN. Is > it possible to charge that battery ever again? > > This are the last messages before Om2007.2 died (the last try from above): > > Nov 12 02:00:36 om-gta02 user.info kernel: usb0: full speed config #1: 500 > mA, Ethernet Gadget, using CDC Ethernet > Nov 12 02:00:36 om-gta02 user.err kernel: power_supply bat: driver failed > to report `voltage_now' property > Nov 12 02:00:37 om-gta02 user.err kernel: power_supply bat: driver failed > to report `voltage_now' property > Nov 12 02:00:37 om-gta02 user.info kernel: ADDRCONF(NETDEV_CHANGE): usb0: > link becomes ready > Nov 12 02:00:45 om-gta02 user.err kernel: power_supply bat: driver failed > to report `voltage_now' property > Nov 12 02:00:46 om-gta02 user.debug kernel: modem wakeup interrupt > Nov 12 02:00:46 om-gta02 user.err kernel: power_supply bat: driver failed > to report `voltage_now' property > Nov 12 02:00:47 om-gta02 user.debug kernel: usb0: no IPv6 routers present > Nov 12 02:01:37 om-gta02 user.warn kernel: AR6000 disconnected > Nov 12 02:01:46 om-gta02 local0.info /usr/sbin/gsm0710muxd[1394]: > gsm0710muxd.c:609:pseudo_device_read(): Logical channel 1 for (null) closed > Nov 12 02:23:27 om-gta02 syslog.info syslogd started: BusyBox v1.11.1 > Nov 12 02:23:27 om-gta02 user.notice kernel: klogd started: BusyBox v1.11.1 > (2008-08-05 02:00:09 CEST) > Nov 12 02:23:27 om-gta02 user.notice kernel: Linux version 2.6.24 ( > [EMAIL PROTECTED]) (gcc version 4.1.2) #1 PREEMPT Thu Aug 28 01:48 > > The "driver failed to report `voltage_now' property" is because at that > time it was on external power. No messages were logged after I put in the > battery. > > > _______________________________________________ > support mailing list > [email protected] > https://lists.openmoko.org/mailman/listinfo/support > > -- Paul Email - [EMAIL PROTECTED] There were moments when he looked on evil simply as a mode through which he could realize his conception of the beautiful. Oscar Wilde - The Picture of Dorian Gray
_______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
