Hi I recently installed Debian on my Freerunner. The installation worked fine, I installed it with Qi "support" and of course Qi on my phone (in the NAND). Then I tried to boot the Freerunner from NAND (pessing and holding power and then AUX too) but it always boots Qtopia from flash. I also tried to boot from NOR and boot with Boot from microSD (Fat+ext2), but it gives some output and returns then to the boot menu (just the information that I think it could be useful :) ):
Card Type: SD 2.0 SHDC Manufacturer: 0x03, OEM "SD" Product Name: "SU04G", revision 8.0 ... MMC/SD size: 3MiB reading uImage.bin ** Unable to read "uImage.bin" from mmc 1:1 ** Wrong Image Format for bootm command ERROR: can't get kernel image! If I just press the power button until it starts, I get the following messages: s3c2410_udc: debugfs dir creation failed -19 Root-NFS: No NFS server available, giving up. VFS: Unable to mount root fs via NFS, trying floppy. Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) Then the led under the AUX button blinks red and the Freerunner hangs and I have to pull out the battery. And my bootloaders look like this: r...@om-gta02:~# grep Bootloader /dev/mtdblock1 Qi Bootloader s3c2442 pads.home.warmcat.com master_a2d11c4dd18c9517 r...@om-gta02:~# grep Bootloader /dev/mtdblock0 Neo1973 Bootloader U-Boot 1.3.2-moko12 So, this is all information I have that could be useful to solve the problem. If there is any additional information needed, just tell me, I'm not very familiar with the booting process of the Freerunner yet. Could anyone please help me with my problem? Thanks in advance! -- View this message in context: http://n2.nabble.com/Debian-boot-problems...-tp2023536p2023536.html Sent from the Openmoko Support mailing list archive at Nabble.com. _______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
