arne anka wrote: >> Here is the story. (Not to repeat!) > > well, to rub salt in it ... > are you sure, mtd0 was the right device file to write to? > the kernel-ipk has a postinst script, that before flashing the new kernel > checks for the right device -- the same way allows for seeing what the > other devices are for (i do not have it avaliable atm, but once you got > your neo up and running again, you should look for it.)
Yes, mtd0 is right. Looking at the kernel flash method would have probably been a good idea. > > next thing is, that it might be helping if you could narrow down your > position somehow, i assume it is somewhere in the black forrest area, > right? Freiburg to be precise. > maybe there are owners of a debug board near you who hesitate to do the > postal thing, but would happily help, if you're in the neighbourhood. > >> So i just tried it: >>> nandwrite /dev/mtd0 gta01bv4-u-boot.bin >>> Input file is not page aligned >>> Data was only partially written due to error >>> : Success >> Success? Error? > > good lord! with a message like that i would never have shutdown the thing! *g* It was a gamble. But what should I do. There is obviously no one nearby who knows the right way here in the mailing lists and on irc. -- Drucken Sie diese Mail bitte nur auf Recyclingpapier aus. Please print this mail only on recycled paper. _______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
