-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Somebody in the thread at some point said: | I bought myself an 8Gb uSD and installed Debian on it, but it wouldn't | boot. u-boot simply said it couldn't find the uImage.bin, which is in | /dev/mmcblk0p1, with the rest in /dev/mmcblk0p2. | | I read that Qi might work better, so I flashed the latest from the | /andy directory (18.12.08). I added | | root=/dev/mmcblk0p2 loglevel=8 rootdelay=5 | | to append-GTA02 on /dev/mmcblk0p1 | | When I press the power button, it flashes the red LED twice, vibrates | very briefly, and then boots from NAND (2008.testing). From NAND, I | can mount /dev/mmcblk0p1 and /dev/mmcblk0p2 (both ext2) with no | bother. | | What can I do to boot from uSD?
First Qi takes care of root= so the need to handle that is gone. It sets root= according to where it found the first usable kernel. So need to remove what you have in partition 1, and add a kernel named /boot/uImage-GTA02.bin into partition 2 (since that's your rootfs), which should be ext2 or better ext3. Qi will check the first 3 partitions for something it can use before falling back to NAND. - -Andy -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkmEDsIACgkQOjLpvpq7dMrSlQCeM30IwzYBFydaUiUFVrj+Pfsm Ab8An1I+0Oet9tzi0A6UXuRgeSDLhbNM =REnX -----END PGP SIGNATURE----- _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
