I bought a 4gb SDHC card, and it is not recognized. I thought I read on this list that it is supported. Is there something I need to do before fdisk? output below.
Thanks Seth r...@om-gta02:~# fdisk /dev/mmcblk0 fdisk: cannot read from /dev/mmcblk0 r...@om-gta02:~# r...@om-gta02:~# uname -a Linux om-gta02 2.6.24 #1 PREEMPT Thu Nov 6 02:57:37 CST 2008 armv4tl unknown r...@om-gta02:~# dmesg | grep mmcbl (duplicate lines trimmed) [ 38.775000] mmcblk0: error -110 sending read/write command [ 38.780000] end_request: I/O error, dev mmcblk0, sector 0 [ 38.780000] Buffer I/O error on device mmcblk0, logical block 0 [ 38.845000] mmcblk0: error -84 sending read/write command [ 38.850000] end_request: I/O error, dev mmcblk0, sector 0 [ 38.850000] Buffer I/O error on device mmcblk0, logical block 0 [ 2702.900000] mmcblk0: error -110 sending read/write command [ 2702.905000] end_request: I/O error, dev mmcblk0, sector 0 [ 2702.905000] Buffer I/O error on device mmcblk0, logical block 0 r...@om-gta02:~# r...@om-gta02:~# modprobe s3cmci modprobe: module s3cmci not found modprobe: failed to load module s3cmci "This has been fixed in commits 2831 (for 2.6.21.x) and 2832 (for 2.6.22.x)." _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
