i just found out that 2.6.28 is avaliable in debian and immediately upgraded -- booting now shows a lot of weird messages jiffs2 related, from which i can't make anything. the last three lines appeared while i was typing this mail ...
[21474540.115000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0 [21474540.130000] SD power -> 3200mV [21474540.130000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 [21474540.140000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 [21474540.150000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 [21474540.155000] pcf50633-rtc pcf50633-rtc: setting system clock to 2009-02-21 14:19:54 UTC (1235225994) [21474540.160000] glamo-mci glamo-mci.0: Error after cmd: 0x8120 [21474540.165000] glamo-mci glamo-mci.0: Error after cmd: 0x120 [21474540.170000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x80 [21474543.180000] RCU detected CPU 0 stall (t=4294908636/600 jiffies) [21474543.180000] [<c02dbb3c>] (dump_stack+0x0/0x14) from [<c007950c>] (__rcu_pending+0x80/0x224) [21474543.180000] [<c007948c>] (__rcu_pending+0x0/0x224) from [<c00796c8>] (rcu_pending+0x18/0x4c) [21474543.180000] r7:0000001e r6:c781c020 r5:00000000 r4:00000000 [21474543.180000] [<c00796b0>] (rcu_pending+0x0/0x4c) from [<c0053e54>] (update_process_times+0x40/0x64) [21474543.180000] [<c0053e14>] (update_process_times+0x0/0x64) from [<c00334a4>] (timer_tick+0x100/0x128) [21474543.180000] r6:00000000 r5:00000000 r4:c03c6bd0 [21474543.180000] [<c00333a4>] (timer_tick+0x0/0x128) from [<c003f6dc>] (s3c2410_timer_interrupt+0x10/0x18) [21474543.180000] r4:c03c43e4 [21474543.180000] [<c003f6cc>] (s3c2410_timer_interrupt+0x0/0x18) from [<c0076ab4>] (handle_IRQ_event+0x2c/0x68) [21474543.180000] [<c0076a88>] (handle_IRQ_event+0x0/0x68) from [<c00780c4>] (handle_edge_irq+0x12c/0x178) [21474543.180000] r7:c03c7d34 r6:c03c43e4 r5:0000001e r4:c03c7d00 [21474543.180000] [<c0077f98>] (handle_edge_irq+0x0/0x178) from [<c002f064>] (__exception_text_start+0x64/0x84) [21474543.180000] r8:00000001 r7:00000002 r6:00004000 r5:00000000 r4:0000001e [21474543.180000] [<c002f000>] (__exception_text_start+0x0/0x84) from [<c002fa38>] (__irq_svc+0x38/0xc8) [21474543.180000] Exception stack(0xc781fbf8 to 0xc781fc40) [21474543.180000] fbe0: c7a33c00 c70ce220 [21474543.180000] fc00: 1ef08742 b6fe1649 c7af7a20 c70ce220 c7af7a24 c70ce235 c7a33c00 c7a38908 [21474543.180000] fc20: c7a719f0 c781fc64 c781fc68 c781fc40 c0155c60 c01479f4 00000013 ffffffff [21474543.180000] r5:f4000000 r4:ffffffff [21474543.180000] [<c0147964>] (jffs2_add_fd_to_list+0x0/0xb8) from [<c0155c60>] (jffs2_sum_scan_sumnode+0x4c8/0x704) [21474543.180000] r8:c7a33c00 r7:c7abd940 r6:ffffffff r5:c70ce220 r4:c7abfab2 [21474543.180000] [<c0155798>] (jffs2_sum_scan_sumnode+0x0/0x704) from [<c014d144>] (jffs2_scan_medium+0x3a0/0x1494) [21474543.180000] [<c014cda4>] (jffs2_scan_medium+0x0/0x1494) from [<c0150220>] (jffs2_do_mount_fs+0x18c/0x55c) [21474543.180000] [<c0150094>] (jffs2_do_mount_fs+0x0/0x55c) from [<c0151e30>] (jffs2_do_fill_super+0x134/0x21c) [21474543.180000] [<c0151cfc>] (jffs2_do_fill_super+0x0/0x21c) from [<c0152be8>] (jffs2_fill_super+0xc8/0xfc) [21474543.180000] r7:00000000 r6:00000001 r5:c7a3e000 r4:c7a33c00 [21474543.180000] [<c0152b20>] (jffs2_fill_super+0x0/0xfc) from [<c01d17a4>] (get_sb_mtd_aux+0x64/0xc8) [21474543.180000] r7:c780e2a0 r6:00000000 r5:00008000 r4:c7a3e000 [21474543.180000] [<c01d1740>] (get_sb_mtd_aux+0x0/0xc8) from [<c01d1974>] (get_sb_mtd+0x16c/0x198) [21474543.180000] r8:00000000 r7:00008000 r6:c7a32000 r5:c7a32000 r4:01f00006 [21474543.180000] [<c01d1808>] (get_sb_mtd+0x0/0x198) from [<c01528fc>] (jffs2_get_sb+0x24/0x30) [21474543.180000] [<c01528d8>] (jffs2_get_sb+0x0/0x30) from [<c00a61e4>] (vfs_kern_mount+0x58/0xac) [21474543.180000] [<c00a618c>] (vfs_kern_mount+0x0/0xac) from [<c00a6298>] (do_kern_mount+0x40/0xdc) [21474543.180000] r8:c03cb964 r7:c7a40000 r6:00000000 r5:c7a32000 r4:00008000 [21474543.180000] [<c00a6258>] (do_kern_mount+0x0/0xdc) from [<c00bc884>] (do_mount+0x6b4/0x70c) [21474543.180000] r8:00008000 r7:00000000 r6:00000000 r5:00008000 r4:c7a32000 [21474543.180000] [<c00bc1d0>] (do_mount+0x0/0x70c) from [<c00bc96c>] (sys_mount+0x90/0xdc) [21474543.180000] [<c00bc8dc>] (sys_mount+0x0/0xdc) from [<c0008dd4>] (mount_block_root+0x108/0x2ac) [21474543.180000] r7:00008000 r6:c78fa000 r5:c0027880 r4:c78fa000 [21474543.180000] [<c0008ccc>] (mount_block_root+0x0/0x2ac) from [<c0008fcc>] (mount_root+0x54/0x6c) [21474543.180000] [<c0008f78>] (mount_root+0x0/0x6c) from [<c0009158>] (prepare_namespace+0x174/0x1d8) [21474543.180000] r5:c0027838 r4:c03e7628 [21474543.180000] [<c0008fe4>] (prepare_namespace+0x0/0x1d8) from [<c0008438>] (kernel_init+0xc4/0xf0) [21474543.180000] r5:c0026644 r4:c03e7618 [21474543.180000] [<c0008374>] (kernel_init+0x0/0xf0) from [<c004cf80>] (do_exit+0x0/0x6e8) [21474543.180000] r5:00000000 r4:00000000 [21474544.075000] jffs2_scan_inode_node(): CRC failed on node at 0x0f11a7c4: Read 0xffffffff, calculated 0x9c47de52 [21474544.080000] Empty flash at 0x0f11a808 ends at 0x0f11b000 [21474544.640000] glamo-mci glamo-mci.0: Error after cmd: 0x8120 [21474544.645000] glamo-mci glamo-mci.0: Error after cmd: 0x120 [21474544.655000] VFS: Mounted root (jffs2 filesystem). [21474544.660000] Freeing init memory: 156K [21474544.665000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x00 INT4=0x40 INT5=0x00 [21474544.695000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00 [21474544.755000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00 [21474544.765000] SD power -> 2700mV [21474544.765000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0 [21474544.765000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0 [21474544.765000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0 [21474544.795000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0 [21474544.820000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0 [21474544.825000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0 [21474544.830000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2 [21474544.835000] mmc1: new high speed SDHC card at address ca8b [21474544.855000] mmcblk0: mmc1:ca8b SU08G 3.60 GiB [21474544.860000] mmcblk0: p1 p2 p3 p4 [21474558.535000] pcf50633 0-0073: INT1=0x84 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00 [21474558.600000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00 [21474558.625000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00 [21474561.590000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00 [21474561.615000] pcf50633 0-0073: adc result = 43 [21474561.640000] pcf50633 0-0073: usb curlim to 100 mA [21474561.735000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x10 INT4=0x00 INT5=0x00 [21474561.875000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00 [21474561.925000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00 [21474571.325000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [21474571.340000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI [21474571.365000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 [21474571.370000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 [21474571.445000] usb usb1: configuration #1 chosen from 1 choice [21474571.455000] hub 1-0:1.0: USB hub found [21474571.460000] hub 1-0:1.0: 2 ports detected [21474571.495000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [21474571.500000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [21474571.520000] usb usb1: Product: S3C24XX OHCI [21474571.525000] usb usb1: Manufacturer: Linux 2.6.28-20090105.git69b2aa26 ohci_hcd [21474571.535000] usb usb1: SerialNumber: s3c24xx [21474571.845000] usb 1-1: new full speed USB device using s3c2410-ohci and address 2 [21474572.125000] usb 1-1: configuration #1 chosen from 1 choice [21474572.140000] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001 [21474572.140000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [21474573.215000] Bluetooth: Core ver 2.13 [21474573.245000] NET: Registered protocol family 31 [21474573.250000] Bluetooth: HCI device and connection manager initialized [21474573.265000] Bluetooth: HCI socket layer initialized [21474573.400000] Bluetooth: Generic Bluetooth USB driver ver 0.3 [21474573.425000] usbcore: registered new interface driver btusb [21474575.740000] Adding 156868k swap on /dev/mmcblk0p4. Priority:-1 extents:1 across:156868k [21474581.280000] ASoC version 0.13.2 [21474581.600000] WM8753 Audio Codec 0.16 [21474581.645000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok [21474581.685000] asoc: WM8753 Voice <-> Bluetooth mapping ok [21474582.795000] g_ether gadget: using random self ethernet address [21474582.810000] g_ether gadget: using random host ethernet address [21474582.880000] usb0: MAC 3e:80:5d:f3:c8:bf [21474582.910000] usb0: HOST MAC a6:77:f6:f8:bc:a7 [21474582.930000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [21474582.940000] g_ether gadget: g_ether ready [21474582.980000] gta02_udc_command S3C2410_UDC_P_ENABLE [21474583.620000] g_ether gadget: full speed config #1: CDC Ethernet (ECM) [21474586.650000] pcf50633 0-0073: usb curlim to 500 mA [21474586.705000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x20 INT4=0x00 INT5=0x00 [21474586.800000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00 [21474586.845000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00 INT4=0x00 INT5=0x00 [21474593.355000] kjournald starting. Commit interval 5 seconds [21474593.370000] EXT3 FS on mmcblk0p2, internal journal [21474593.375000] EXT3-fs: mounted filesystem with ordered data mode. [21474593.425000] kjournald starting. Commit interval 5 seconds [21474593.430000] EXT3 FS on mmcblk0p3, internal journal [21474593.435000] EXT3-fs: mounted filesystem with ordered data mode. [21474611.380000] NET: Registered protocol family 10 [21474620.620000] Bluetooth: L2CAP ver 2.11 [21474620.630000] Bluetooth: L2CAP socket layer initialized [21474621.420000] Bluetooth: RFCOMM socket layer initialized [21474621.425000] Bluetooth: RFCOMM TTY layer initialized [21474621.430000] Bluetooth: RFCOMM ver 1.10 [21474622.055000] usb0: no IPv6 routers present [ 52.285000] JFFS2 warning: (1663) jffs2_sum_write_data: Not enough space for summary, padsize = -778 [ 300.005000] fbcon_event_notify action=12, data=c7831df4 [ 300.005000] jbt6k74 spi2.0: **** jbt6k74 normal debian-gta02:~# _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
