Yeap!! it works!! I had no idea about the 30 sec timeout! AT%sleep=1 helped a lot!!
thanx Joerg Reisenweber wrote: > > Am Mi 18. März 2009 schrieb xChris: >> >> Hi, >> >> Using the socat - file:/dev/ttySAC0,crtscts,crnl,b115200 , I issue AT >> commands but I get no response! >> (i have the moko11 f/ware) >> >> Note that, when I am connected with the modem (via the socat), when I >> receive a call, I can see >> the messages of the modem... so I only cannot issue AT commands. >> > please note modem in standard setup has a 10sec timeout to power down > serial > IF. This means after 10 sec the first command is swallowed to /dev/null > and > you have to re-issue same command during the following 10sec activation > time > > you can change this with > AT%sleep=1 > > HTH > /j > > > _______________________________________________ > support mailing list > [email protected] > https://lists.openmoko.org/mailman/listinfo/support > > -- View this message in context: http://n2.nabble.com/-QT-Extended-Improved-20090316-snapbuild--cannot-issue-AT-commands-to-modem-tp2497229p2498633.html Sent from the Openmoko Support mailing list archive at Nabble.com. _______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
