Iurii wrote:
> 
> 
> 
> Robin Paulson wrote:
>> 
>> 2009/11/23 Iurii <y...@reverseenterprises.com>:
>>> i tried the suggestions of wiki but... i forced problems with it and i
>>> still
>>> cant connect it that's why i asked here(
>> 
>> i use this bash script to connect. it probably has errors and bad
>> practice contained within, but it works for me:
>> 
>> sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
>> sudo sysctl -w net.ipv4.ip_forward=1
>> sudo ifconfig eth2 up
>> ssh r...@192.168.0.202
>> 
>> there are other methods. some of them may be better
>> 
>> eth2 may be your neo connection, it might not be. it depends upon the
>> network cards in your computer
>> 
>> try running ifconfig to find out which connection the neo is given
>> 
>> _______________________________________________
>> support mailing list
>> support@lists.openmoko.org
>> https://lists.openmoko.org/mailman/listinfo/support
>> 
>> 
> 
> eth0      Link encap:Ethernet  HWaddr 00:14:2a:a9:4d:fb  
>           UP BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:39863 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:4764 errors:0 dropped:1 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000 
>           RX bytes:5180502 (4.9 MB)  TX bytes:622521 (607.9 KB)
>           Interrupt:16 Base address:0xe400 
> 
> lo        Link encap:Local Loopback  
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:1778 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:1778 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0 
>           RX bytes:146052 (142.6 KB)  TX bytes:146052 (142.6 KB)
> 
> usb0      Link encap:Ethernet  HWaddr d2:d8:e1:48:cd:a2  
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:125 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000 
>           RX bytes:0 (0.0 B)  TX bytes:18376 (17.9 KB)
> 
> this is my ifconfig
> can you try to explain me what should i do now ? 
> the freeruneer is connected as usb0 i think sow
> 
> 
forget to say i dont have nothing connected now exept of freeruner throw USB
i disconected the lan for the moment
-- 
View this message in context: 
http://n2.nabble.com/need-sugestions-tp4036447p4050243.html
Sent from the Openmoko Support mailing list archive at Nabble.com.

_______________________________________________
support mailing list
support@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/support

Reply via email to