On 29 March 2011 11:55, Dave Schmidt <dvs...@gmx.com> wrote: > Hello everyone, > > I have my Freerunner connected to the PC via USB cable. SSH terminal is open. > > I want to access the phone via serial interface (to flash osmocombb firmware). > Could/should the same usb cable be used for that? I have > created a node (mknod /dev/ttyUSB0 c 188 0) and inserted module > (modprobe usbserial) on the PC, but usbserial does not find any device. > The report is only: > > usbcore: registered new interface driver usbserial > USB Serial support registered for generic > usbcore: registered new interface driver usbserial_generic > usbserial: USB Serial Driver core
Flashing GSM firmware is a bit more difficult on the FR, see http://wiki.openmoko.org/wiki/GSM/Flashing section "Manual Update". Maybe you ask other people at osmocombb if and how they did their firmware upgrade on the FR. _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
